Historically, implants to repair bone fractures have been made of metal, donor bone, or even more recently 3D-printed material. Now, scientists propose an in-situ printing approach - using a modified glue gun.
Even though many implants such as artificial joints and pacemakers are made of titanium, they occasionally break – but why? A researcher is investigating implant failure and how to prevent it.
A novel procedure at UC San Diego Health uses a combination of artificial intelligence and 3D printing to develop a customized implant for the spine during fusion surgery.
Dysphagia can significantly reduce a person's quality of life. Now, research teams have developed a new 3D bioprinting method to create safe and appealing meals for dysphagia diets.
A novel approach to bioprinting may lead to new ways to treat skin burns and severe wounds. With this, the researchers aim to create new skin that does not become scar tissue but a functioning dermis.
An implantable device could save diabetes patients from life-threatening hypoglycemia. Remaining under the skin, it can be triggered to release glucagon when blood sugar levels get too low.
From personalized medical guides and implants to advanced surgical planning solutions: 3D printing and visualization has seen considerable growth over the past years and is already making a significant impact in healthcare. AI, cloud, and virtual/augmented reality technologies show promise to further advance the number of applications.
Researchers used state-of-the-art 3D bioprinting to replicate the complex structure and environment of spinal discs. Their insights hold promise for understanding back pain and disc degeneration.
A team of scientists has developed a method for 3D printing polymers at specific locations deep within living animals.
Researchers have developed ‘sponge-like’ microneedle patches that deliver bioactive ingredients and reduce inflammation in slow- and non-healing diabetic wounds.
Leveraging bioink from pancreatic tissue and 3D bioprinting, researchers developed a structure closely mimicking the structure of a pancreas, in which cultured cells can resume insulin production.
Engineers developed a robotic probe that can generate high-resolution 3D ultrasound images from deep inside the gastrointestinal tract. The robot reaches its target with a unique kind of movement.
Anatomically accurate 3D-printed phantoms for CT imaging and AI training show promise as an alternative to cadavers. The new technology allows for patient-specific phantoms with realistic radiopacity.
Highlights:Maximum design freedom Small feature size of 80 μm Less X-ray scatter for premium image quality Improved and simplified assembly processes that save costs Access to top-level detection and grid design expertise to co-create from conceptualization to mass production
Patient-specific 3D printed surgical guides could provide a clear visual aid that helps cardiac surgeons locate key treatment areas on the heart, such as the optimal location to build the bypass vein.
US engineers turned to the world of parasites as inspiration to affix small-scale medical devices to the GI tract or other soft tissues for sensing, sample collection, and extended drug release.
Monitoring brainwaves and diagnosing neurological conditions could benefit from a novel 3D printing technology, which applies liquid ink onto a patient’s scalp to measure brain activity.
United Imaging are excited to share that, in partnership with Fora S.p.A., an industry leader with over 50 years of expertise in delivering advanced diagnostic technologies to the Italian market, Policlinico Casilino Hospital will join the company's global network. Demonstrating its commitment to innovation and growth, the hospital has selected the industry-leading 640-slice CT scanner to…
Future-oriented large-scale investments on the one hand, political unrest on the other: The presentation of award-winning medical technology from Taiwan at Medica in Düsseldorf reflected a year full of changes and challenges. The prize-winning solutions for surgery, intensive care medicine, traumatology and endoscopy once again attracted a large professional audience.
A newly developed ‘biocooperative’ material based on blood can guide key processes taking place during the natural healing of tissues to create living materials that enhance tissue regeneration.
To take cell therapy in regenerative medicine to a new level, experts consider 3D bioprinting a key technology. However, there are still quality issues that need to be overcome to achieve this.
The year: 2034. Breast cancer patients benefit from perfectly personalised diagnostics and therapies. The tedium of follow-up treatments is a thing of the past, thanks to AI, augmented reality and robotics. Just a tale from the realm of science fiction, or could this soon be clinical reality? At the annual meeting of the German Senologic Society, Prof Dr Marc Thill from the Agaplesion Markus…
New insights into metastasis: Scientists created a 3D-printed model to mimic the specific conditions that spur the spread of cancer cells. This could help discover new screening and treatment options.
Using a melt electrowriting (MEW) technique, bioengineers have developed a hybrid structure to address the clinical need for small-diameter vascular grafts and help combat cardiovascular disease.
A band-aid for the heart? US researchers have developed a new way to 3D print material that is at once elastic, tough, and shapable enough to fit a patient’s unique heart or joint defects.
Researchers have created a mucus-based bioink which can be used for 3D printing lung tissue. This advance could one day help study and treat chronic lung conditions.
As demand for innovative healthcare solutions is at an all-time high, Medical Taiwan once again attracted a record number of visitors for its 2024 edition. The show’s organizer, the Taiwan External Trade Development Council (TAITRA), proudly reported an increase in attendance by 10% compared with the previous year. During the three-day event in Taipei, the audience was treated to a wide range…
A new research project focuses on creating a 3D printed device to grow a human spinal cord organoid for the study of spinal cord injury and subsequent drug testing.
A new 3D graft printing technique offers a potential solution to reduce thrombosis and restrain aneurysmal dilatation post-surgery, with potential for improving cardiovascular disease treatments.
Researchers have developed a cutting-edge method for fabrication of customised pharmaceutical tablets with tailored drug release profiles, ensuring more precise and effective treatment options.
Using 3D bioprinting to accurately replicate the biological environment surrounding gastric cancer cells, researchers predicted a patient’s response to anticancer drugs during the preclinical stage.
‘Next Generation Radiology: Embracing the future and redefining the field of radiology’: In the run-up to the European Congress of Radiology 2024, we spoke with ESR President Professor Carlo Catalano from Rome, Italy, about the meeting’s content and its intriguing theme.
Researchers present new 3D-printable materials that can be easily monitored using X-ray or CT imaging. This has great potential to expand the possibilities of reconstructive and plastic surgery.
Researchers have developed a 3D-bioprinted, miniaturized chip to advance the understanding of cardiovascular disease and aid in the development of new precision treatments.
Material scientists at TU Wien (Vienna) have developed a new approach to producing artificial cartilage tissue: using a 3D printer, cells are grown in microstructures.
Combining a biological heart and a silicone robotic pump, researchers created a biorobotic heart that beats like a real one, with a focus on a valve on the left side of the heart.
With the help of AI, a team at Caltech has designed a new type of catheter tube that impedes the upstream mobility of bacteria, without the need for antibiotics or chemical antimicrobial methods.
Dutch researchers successfully inserted magnet-controlled miniature robots into an aorta model with kidneys. In the future, this technology could be used to remove blood clots.
A fully digital design-to-manufacturing process developed at Loughborough University has the potential to revolutionise lower limb socket production by allowing printing outside of hospital settings.
Researchers from the University of Birmingham have designed and developed a novel diagnostic device to detect traumatic brain injury (TBI) by shining a safe laser into the eye.
The field of lab-on-a-chip needs to meet important challenges around sustainability. This includes not only the development of smart analytical systems that are able to sense the changes that are occurring within the environment but also, more generally, the mitigation of single-use plastics in analysis and the use of low-power, recyclable microsystem technologies.
Faster, more accurate and cost-effective testing: Experts outline the beginnings and evolution of “lab-on-a-chip” technology, and its benefits for advanced and next-gen operational platforms.
A European team of researchers have successfully developed a new, living organ model which could advance rapid testing of new or common drugs to treat diseases of the liver.
University of Oxford researchers demonstrated that neural cells can be 3D printed to mimic the architecture of the cerebral cortex. This could be used in patients after brain injuries.
A team at the University of Bristol has developed a robot manipulator that could carry out clinical breast examinations. The developers hope the device will revolutionise breast health monitoring.
Today, on September 30th, the Human Brain Project (HBP) formally completes its 10-year runtime as an EU-funded FET Flagship. Three HPB lead figures recount what has been achieved.
Identifying victims of major disasters remains a significant challenge for investigators. Often, identification can take weeks or longer but new approaches are paving the way for greater accuracy and quicker identification whilst preserving the body without unnecessary invasive investigation. An expert session at ECR heard about how new imaging technology can help with disaster victim…
A new device, designed by MIT researchers, could detect breast cancer earlier. The scanner, which can be incorporated into a bra, could allow more frequent monitoring of high-risk patients.
Researchers at Mayo Clinic have developed a 3D prototype of human skin bioprinted to model inflammatory skin disease such as atopic dermatitis — more commonly known as eczema.
Using 4D printing technology, researchers have developed flexible electrodes. On contact with moisture, they automatically fold and wrap themselves around thin nerves.
Researchers from Queen’s University Belfast have created personalised 4D printed “smart” implants for breast cancer management - a first for this technology.
Post-pandemic problems, ageing societies, the impact of climate change on human health: To find solutions for new and ongoing healthcare challenges, thinking outside the box is crucial. This year’s Medical Taiwan Health & Care Expo took this approach to heart: True to its motto “beyond healthcare”, the event showcased a wide range of innovative products, promising start-up presentations…
Missing crucial doses of medicines and vaccines could become a thing of the past thanks to Rice University bioengineers’ technology for making time-released drugs.
A new method for cheaply producing heart valves in the span of minutes shows great promise. The scientists describe the method as "a cotton-candy machine with a hair dryer behind it."
A new advanced form of CT imaging offers better cardiovascular imaging quality compared to dual-source CT (DSCT) in infants with suspected cardiac heart defects, according to a new study.
Exosuits are adding a new dimension to rehabilitation and human augmentation options for people with limited movements after sustaining injury. High-tech sensors, actuators, controllers and soft textiles are advancing the possibilities of exosuits, with 3D printed components further enhancing the power and accuracy of the devices. The latest innovations were outlined by exosuit expert Professor…
Researchers at the University of Campinas and the Federal University of São Carlos in Brazil have developed an electrochemical sensor that detects Parkinson's disease at different stages.
Researchers demonstrate a HoloLens AR system that enables accurate, flexible needle guidance for transperineal prostate interventions such as biopsy, focal laser ablation, and brachytherapy
60 percent of all administered drugs do not have the desired therapeutic effect. Even worse: in Germany alone about 60,000 deaths per year are caused by medication. With these shocking statistics Professor Dr Christian Franken started his presentation on “Pills from the 3D printer” at last year’s Medica in Düsseldorf. He hopes that his vision of personalized medication based on 2D and 3D…
Researchers at the University of New South Wales unveil prototype device that can directly 3D print living cells onto internal organs and potentially be used as an all-in-one endoscopic surgical tool.
Researchers have developed a new tool and technique that uses “vortex ultrasound” – a sort of ultrasonic tornado – to break down blood clots in the brain.
Researchers use AI to develop personalized 3D-printed joint implants so that these delicate finger parts can be replaced when necessary (e.g. after illness or injury).
A custom-made new hip, a knee or maybe a piece of bone? The technology and possibilities for 3D printing are (almost) there. And such an implant from a 3D printer has many advantages, not only for the patient, but also for the surgeon who has to perform the operation. Koen Willemsen, physician, and medical engineer at the University Medical Center Utrecht (UMCU), was at the cradle of the 3D lab…
Volumetric 3D images and 3D models are becoming increasingly important in medical technology. Schneider Digital's high-resolution 3D PluraView stereo monitors are a perfect fit for 3D stereo display of medical data, especially from CT and MRI scanners.
Speed or accuracy? As far as Covid-19 tests go, this was the choice you had to make. In the future, this dilemma could be a thing of the past.
Bowel cancer patients could in future benefit from a new 3D bioprinting technology which would use their own cells to replicate the complex cellular environment of solid tumours in 3D models.
Engineers from EPFL and the University of Strasbourg have developed a surgical needle whose trajectory can be corrected on the fly, thanks to a flexible tip controlled with a simple button.
Driving the healthcare industry towards digital transformation was the main direction of Automa+ 2022. The Congress gathered leaders from hospitals and healthcare providers, pharmaceutical companies, governmental bodies and institutions as well as medical device manufacturers, service providers and start-ups in Zurich, Switzerland on September, 26-27, 2022.
By recreating the helical structure of heart muscles, bioengineers improve understanding of how the heart beats.
Spinal fusion—fusing two vertebrae together—can treat a wide variety of spinal disorders. A patient-specific 3D-printed smart metamaterial implant doubles as sensor to monitor spinal healing.
Researchers have developed 3D printed artificial heart valves designed to allow a patient’s own cells to form new tissue.
A research team in Spain and the US has created 3D-printed acoustic holograms to improve the treatment of diseases like Alzheimer's and Parkinson's, among others.
3D-printed sugar models of dense and chaotic blood vessel networks near tumors could help future cancer treatments.
In a pair of world firsts, scientists have 3D printed human testicular cells and identified promising early signs of sperm-producing capabilities.
The new 3D-printable mask design promises easy breathing for users while maintaining similar levels of protection against pathogens found in N95 and surgical masks.
Researchers have developed a new type of lightweight 3D-printed back brace capable of sensing how effectively it fits patients. Its developers say it could lead to improved treatment for scoliosis.
Scientists at Queen’s University Belfast have invented a tiny indicator that changes colour if a patient’s wound shows early signs of infection.
Researchers have developed a device that removes one of the biggest bottlenecks preventing quick, reliable malaria diagnosis.
The team at the Institute of Medical Device Technology at the University of Stuttgart, Germany, is developing methods to produce top-quality medical devices at affordable prices. Professor Dr Peter Pott, the director of the institute, turns to 3D printers to successfully realize his vision of “high end at low cost”.
Evonik offers a comprehensive portfolio of 3D printable med-tech biomaterials that can be used to produce medical devices with temporary or permanent body contact. Marc Knebel, head of Medical Systems at Evonik, explains the benefits and applications of the new high-performance polymer VESTAKEEP Care M40 3DF.
Loosening hip implants can cause major damage to the bone and a simple replacement won’t suffice to carry the load during movements. “To solve this problem we have to turn to innovative technologies such as bioprinting. Scaffolds are required that – while adapting slowly – offer long-term stability,” says Professor Dr Dieter Wirtz, Director of the Department of Orthopaedics and Trauma…
Drug delivery, blood extraction, contrast agent injection – many procedures in modern medicine would be utterly impossible without needles. Despite the benefits, inserting pointy metal tubes into a patient also comes with several drawbacks. By downscaling the to micrometer-size, Japanese researchers open even more areas of application for needles, while bypassing some of the most important…
The light from a smartphone screen can be used to print medications, in a new 3D printing technique developed by UCL researchers.
Researchers at the University of Rochester, and Delft University of Technology in the Netherlands recently developed a 3D printing technique to engineer and study biofilms—three-dimensional communities of microorganisms, such as bacteria, that adhere to surfaces. The research provides important information for creating synthetic materials and in developing drugs to fight the negative effects of…
Medica trade fair (November 15-18) is once again a welcome field for many healthcare start-ups to present their products. The joint stand at the 'Medica Start-up Park' in Hall 12 has become the central cross-national meeting point for the healthcare start-up scene, the fair's organizers are pleased to report. "We bring innovators and investors together. This time, more than 40 start-ups are…
“An artificial uterus – the incubator 2.0 – will become a reality within 10 years,” says Jasmijn Kok, one of the founders of Juno, a spin-off from the Eindhoven University of Technology, Netherlands. Together with researchers from the department of Industrial Design from the University, including her twin sister Lyla Kok, she wants to bring a technology that increases the chances of…
It is still elusive to what extent interactions between different cell types of the heart influence the normal heart rhythm and possibly trigger life-threatening arrhythmias. A new measurement method developed at the University of Bern combines for the first time optical and electrical recording of cardiac ventricular activation which, in conjunction with optogenetics, will permit finding…
Researchers at Umeå University now demonstrate a method by which specific cell types in human organs can be studied with micrometer precision. The method can be used to reveal previously unrecognised alterations in the pancreas, but it can also be used to study other human organs and diseases.
Researchers at the University of Helsinki could show for the first time that normal human fibroblast cells can be converted to specific cancer cells using only factors that are commonly detected in actual human patients. Previous studies have achieved this only by using powerful viral factors that are not common in human cancers. Since many human cancer types still lack specific diagnostic…
3D metal printing technology is producing personalised medical-grade titanium-alloy plates that perfectly fit individuals suffering arthritis of the knee. Engineers at the University of Bath’s Centre for Therapeutic Innovation (CTI) working with 3D Metal Printing Ltd, are using the TOKA (Tailored Osteotomy for Knee Alignment) treatment to improve the surgical procedure and fit of high-tibial…
Researchers at Tel Aviv University have 3D-printed a first-of-its-kind glioblastoma tumor that mimics a living cancer malignancy, powering new methods to improve treatment and accelerate the development of new drugs for the most lethal type of brain cancer. Glioblastoma is notoriously fatal as it accounts for the majority of brain tumors and is highly aggressive. The average survival time of…
Claustrophobia or anxiety can overwhelm small children and people with cognitive difficulties, especially in a confining and noisy MRI scanner tube. Their restless reactions can then render scan images useless. To help such patients to relax during scanning, a team from King’s College London (KCL) has designed an immersive environment with a special virtual reality (VR) headset for use with MRI…
University of Birmingham scientists have developed a new microscopic imaging approach to take a closer look at 3D-printing for developing future patient implants, as well as improved disease modelling and drug screening. Additive manufacturing (3D printing) platforms create bioprinted structures by moving a special bioink, containing cells, biomolecules and materials, through a narrow tube, but…
First you see it as a transparent shape on a computer screen – a small electronic replica of the human pancreas. Then just 30 seconds later the tissue is printed out on a bioprinter, blood vessels and all, from a sample of human stem cells. This amazing feat is possible thanks to new technology created at EPFL’s Laboratory of Applied Photonics Devices (LAPD) and further developed by…
Researchers at the Human Genome and Stem Cell Research Center (HUG-CELL), hosted by the University of São Paulo’s Institute of Biosciences (IB-USP) in Brazil, have developed a technique to reconstruct and produce livers in the laboratory. The proof-of-concept study was conducted with rat livers. In the next stage of their research, the scientists will adapt the technique for the production of…
Medtech company BellaSeno and the Fraunhofer Institute for Production Technology IPT have received a grant totaling EUR 1.4 million for the development of commercial-scale, fully automated additive manufacturing of resorbable medical implants. The grant was issued by Germany's Federal Ministry of Education and Research (BMBF) under the funding program KMU-innovativ. BellaSeno and Fraunhofer IPT…
Research into 3D bioprinting has grown rapidly in recent years as scientists seek to re-create the structure and function of complex biological systems from human tissues to entire organs. The most popular 3D printing approach uses a solution of biological material or bioink that is loaded into a syringe pump extruder and deposited in a layer-by-layer fashion to build the 3D object. Gravity,…
A study reveals that scalp cooling physically protects hair follicles from chemotherapy drugs. It is the world’s first piece of biological evidence that explains how scalp cooling actually works and the mechanism behind its protection of the hair follicle. The data was part of an innovative hair follicle research project carried out by the dedicated Scalp Cooling Research Centre based at the…
Coronavirus-associated concerns dominate the Top 10 list of important technology hazard risks for hospitals, in an annual report published by ECRI, a nonprofit technology Pennsylvania research firm. The list is derived from ECRI’s team of technology experts who monitor hospital and healthcare organizations, and published to inform healthcare facilities about important safety issues involving…
Researchers at the University of Arizona are developing a Covid-19 testing method that uses a smartphone microscope to analyze saliva samples and deliver results in about 10 minutes. The research team, led by biomedical engineering professor Jeong-Yeol Yoon, aims to combine the speed of existing nasal swab antigen tests with the high accuracy of nasal swab PCR, or polymerase chain reaction,…
Increasingly, hospitals use 3D printing in surgery because the technology can enable fast, unique production of patient-tailored tools at relatively low costs. ‘As the technology itself is developing and accelerating at a fast pace, hospitals may be left behind if they choose not to adopt these advances,’ said Limor Haviv, surgical 3D printing designer at 3D4OP. Today, 3D printing is used in…
Adequate levels of vitamin D reduces complications and deaths among COVID-19 patients, reveals new research performed at the Boston University School of Medicine. Hospitalized COVID-19 patients who were vitamin D sufficient, with a blood level of 25-hydroxyvitamin D of at least 30 ng/mL (a measure of vitamin D status), had a significant decreased risk for adverse clinical outcomes including…
Researchers at the U.S. National Institute of Standards and Technology (NIST) have developed a new method of 3D-printing gels and other soft materials. Published in a new paper, it has the potential to create complex structures with nanometer-scale precision. Because many gels are compatible with living cells, the new method could jump-start the production of soft tiny medical devices such as…
As COVID-19 continues to spread, bottlenecks in supplies and laboratory personnel have led to long waiting times for results in some areas. In a new study, University of Illinois, Urbana-Champaign researchers have demonstrated a prototype of a rapid COVID-19 molecular test and a simple-to-use, portable instrument for reading the results with a smartphone in 30 minutes, which could enable…
Medical device approved 3-D printers are producing clinically safe and effective nasopharyngeal swabs for COVID-19 testing. A nasal swab may seem rudimentary, but is essential for testing COVID-19. Diagnostic test kits and components – nasal swabs, collection vials, and chemical reagents – have been in short supply worldwide, especially in March. Ironically, nasopharyngeal swabs are…
A team of researchers led by the University of Adelaide and University of Stuttgart has used 3D micro-printing to develop the world’s smallest, flexible scope for looking inside blood vessels. The camera-like imaging device can be inserted into blood vessels to provide high quality 3D images to help scientists better understand the causes of heart attack and heart disease progression, and could…
New imaging technique combines two technologies to spot early warning signs of Alzehimer's disease in mice.
The production of highly sensitive sensors is a complex process: it requires many different steps and the almost dust-free environment of special cleanrooms. A research team from Materials Science at Kiel University (CAU) and from Biomedical Engineering at the Technical University of Moldova has now developed a procedure to produce extremely sensitive and energy-efficient sensors using 3D…
BellaSeno GmbH, a company developing absorbable scaffolds using additive manufacturing technologies, announced a collaboration with Charité – Universitätsmedizin Berlin under the recently established SyMBoD consortium. Under the agreement, BellaSeno will design and manufacture personalized, 3D-printed, absorbable implants suitable for the treatment of diabetes patients with bone defects. The…
As countries worldwide face the challenge of managing the COVID-19 pandemic, Ultimaker is making its global network of 3D printing hubs, experts, and designers directly available to hospitals in need of tools and applications that are short in supply and can be quickly produced with 3D printing.
Glioblastomas are complex, fast-growing malignant brain tumors that are made up of various types of cells. Even with aggressive treatment — which often includes surgery, radiation, and chemotherapy — glioblastomas are difficult to treat, leading to an average survival of 11-15 months. In research published in Science Advances, Xavier Intes, a professor of biomedical engineering at Rensselaer,…
ScoliBot, a new robotic system, could perform spinal surgery to a higher degree of accuracy than human counterparts. Devised by a team from Nottingham Trent University (NTU), the system has two robotic arms that semi-autonomously drill holes in individual vertebrae in procedures to straighten the spines of patients with conditions such as scoliosis or kyphosis. Leading the project, Professor…
Researchers at Rensselaer Polytechnic Institute have developed a way to 3D print living skin, complete with blood vessels. The advancement, published in Tissue Engineering Part A, is a significant step toward creating grafts that are more like the skin our bodies produce naturally. “Right now, whatever is available as a clinical product is more like a fancy Band-Aid,” said Pankaj Karande, an…
Healthcare is going digital worldwide at an incredibly rapid pace. More and more applications for prevention, diagnostics and therapy are being made into apps (with matching hardware) for smartphones and tablets or are even available as wearables for direct use on the body. Digitalisation is also striding forward in Germany, where doctors, therapists and patients still take a fairly analogue…
Twenty people die every day waiting for an organ transplant in the U.S., and while more than 30,000 patients now receive transplants annually, another 113,000 are currently on organ waitlists. Many people see artificially grown human organs as the Holy Grail for resolving the organ shortage, and advances in 3D printing have led to a boom in using that technique to build living tissue constructs…
With the help of a 3D printed salt template, ETH researchers from ETH Zurich have succeeded in producing magnesium scaffolds with structured porosity that are suitable for bioresorbable bone implants. For the treatment of complex bone fractures or even missing bone parts, surgeons typically deploy metal implants. In this context, an attractive alternative to the traditional materials like…
Researchers at ETH Zurich have developed a new method for producing malleable microstructures – for instance, vascular stents that are 40 times smaller than previously possible. In the future, such stents could be used to help to widen life-threatening constrictions of the urinary tract in foetuses in the womb. Approximately one in every thousand children develops a urethral stricture,…
Surgery complications, implant rupture, tissue contractures or even plain immune intolerance – silicone breast implants can cause a variety of unfavourable conditions. Because of this, many women think twice about breast augmentation. A new kind of implant might change this up a bit. BellaSeno GmbH, a company developing absorbable implants using additive manufacturing technology, now announced…
Scientists at ETH Zürich and the South African company Strait Access Technologies are using 3D printing to produce custom-made artificial heart valves from silicone. This could help meet an ageing population’s growing demand for replacement heart valves. The human heart has four chambers, each equipped with a valve to ensure blood flow in one direction only. If any of the heart valves are…
MRI is a complicated imaging modality and improving it requires a deep understanding of the physics involved. Scientists at Boston University have been working on improving MRI’s signal-to-noise ratio using special metamaterials that are made of arrays of helical resonators.
The production of artificial organs is a hot research topic. In the near future, artificial organs will compensate for the lack of organ donations and replace animal experiments. Although there are already promising experiments with 3D printers that use a „bio-ink“ containing living cells, a functional organ has never been created in this way. A European consortium coordinated by Dr Elena…
Dunlee, a leading provider of CT, X-ray, MR, and 3D-printed tungsten products for the OEM market and CT tubes for the replacement market, continues to add to its wide CT tube portfolio with the introduction of the CT5000 mid-level CT tube and the CTR1600 series entry-level CT tubes. These tubes are manufactured to Dunlee’s exacting standards and boast excellent performance in their market…
Dunlee, a leading provider of CT, X-ray, MR and 3D-printed tungsten products for the OEM market, is expanding its portfolio of MR products with Invivo MR coils for breast, lungs, neuro, cardiac and orthopedic applications. The Invivo coil family includes coils designed for a range of anatomies, element counts, field strengths and imaging applications. Outstanding design boosts image quality while…
Two millions: this is, worldwide, the number of babies which suffer suffocation during birth every year. A resuscitation procedure is sometimes the key to avert irreparable damages for the baby. And, for successful outcomes, promptness of action and preparation are vital. Researcher Mark Thielen (Industrial Design) from the Eindhoven University of Technology (TU/e) developed a 3D printed baby…
The future of medicine is biological – and scientists hope we will soon be using 3D-printed biologically functional tissue to replace irreparably damaged tissue in the body. A team of researchers from the Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB has been working with the University of Stuttgart for a number of years on a project to develop and optimize suitable…
In a major medical breakthrough, Tel Aviv University researchers have "printed" the world's first 3D vascularised engineered heart using a patient's own cells and biological materials. Until now, scientists in regenerative medicine — a field positioned at the crossroads of biology and technology — have been successful in printing only simple tissues without blood vessels. "This…
With increased precision, speed of service and reduced cost, 3D printing presents an opportunity to transform traditional healthcare and its delivery, and radiology is at the center of this new technology. In the ECR 2019 Special Focus Session “The 3D printing lab from bench to bedside”, the speakers emphasized that 3D printing does not only enable a new and innovative way to display imaging,…
A significantly more effective, minimally invasive treatment for pancreatic tumors may be on the horizon, thanks to a new endoscopy tool created in the Penn State Department of Mechanical Engineering. On average, only about 20 percent of pancreatic cancer patients are eligible for a surgical removal of the tumor, which is currently the most-effective treatment option. The location of the pancreas…
People who underwent larynx surgery face a necessity of a voice prosthesis implantation, but such artificial windpipes are only produced abroad. Scientists at the South Ural State University (SUSU) are developing a Russian analogue of such an apparatus which will be several times cheaper than the imported products. The problem of vocal rehabilitation after larynx is removed has been an issue ever…
As 3D printing technology continues to evolve, read how radiology will be involved in managing digital workflow related to patient care. “3D printing is a part of medicine, and radiology is at the center of this impactful new technology,” said RSNA 3D Printing Special Interest Group (SIG) Chair Jane Matsumoto, MD, assistant professor of radiology and co-director of the 3D Printing Lab at the…
A team of researchers at the University of Minnesota have, for the first time, fully 3D printed an array of light receptors on a hemispherical surface. This discovery marks a significant step toward creating a “bionic eye” that could someday help blind people see or sighted people see better. The research is published in Advanced Materials, a peer-reviewed scientific journal covering…
New products and technologies in medical practice expect the specialists of the leading international exhibition Bulmedica/Buldental from 16 to 18 May at Inter Expo Center. This year, the medical profile of the exhibition will focus on the progress in imaging, physiotherapy, aesthetic medicine. Once again Bulmedica/Buldental will be a platform to keep an eye on the tendencies, a meeting point of…
A multidisciplinary team of scientists share recent advancements in innovative in-vitro cancer biology methods for screening drug-like molecules in cancer tissue relevant models in a new report published online ahead-of-print at SLAS Discovery. Entitled Advanced Development of Primary Pancreatic Organoid Tumor Models for High-Throughput Phenotypic Drug Screening, the report can be accessed for…
A thin copper wire wrapped around a channel slightly thicker than a strand of hair could be the key to manufacturing a compact electronic device capable of counting white blood cells from the comfort of one’s home, a Kennesaw State University researcher says. Hoseon Lee, an assistant professor of electrical engineering in the Southern Polytechnic College of Engineering and Engineering…
China International Medicinal Equipment Fair (CMEF), launched in 1979, is held twice annually – spring and autumn. After over 39 years of continuous innovation and self-improvement, CMEF has become the largest fair of medical devices, related products and services in the Asia-Pacific region. The fair widely covers 15,000 products such as medical imaging, IVD equipment and reagent, medical…
In the next five to 10 years, artificial intelligence is likely to fundamentally transform diagnostic imaging. This will by no means replace radiologists, but rather help to meet the rising demand for imaging examinations, prevent diagnostic errors, and enable sustained productivity increases.
The International Forum Bulmedica /Buldental will be held from 16 to 18 May at Inter Expo Center - Sofia, Bulgaria
A new method of drug manufacture which uses 3D printers to create pharmaceuticals on demand could lead to a ‘Spotify for chemistry’, scientists claim. In a new paper published in the journal Science, researchers from the University of Glasgow present for the first time a new approach to the manufacture of pharmaceuticals which can be made using a digital code. This code is used by a 3D…
Cancer surgeons perform an estimated 1.7 breast biopsies each year, according to the American Association of Preferred Provider Organizations. This makes the procedure a significant proportion of cases referred to anatomic pathologists. This surgery, however, is time-consuming and not always accurate due to shortcomings in existing surgical technology and to human error. Now, a 3D-printed…
Doctors, materials scientists and engineers to present the latest research findings
A team of researchers led by the University of Minnesota has 3D printed lifelike artificial organ models that mimic the exact anatomical structure, mechanical properties, and look and feel of real organs. These patient-specific organ models, which include integrated soft sensors, can be used for practice surgeries to improve surgical outcomes in thousands of patients worldwide. “We are…
Researchers using CT scans and 3-D printing have created accurate, custom-designed prosthetic replacements for damaged parts of the middle ear, according to a study being presented at the annual meeting of the Radiological Society of North America (RSNA). The technique has the potential to improve a surgical procedure that often fails because of incorrectly sized prosthetic implants, researchers…
Royal Philips, a global leader in health technology, announced agreements with 3D Systems and Stratasys, two global leaders in the 3D printing industry, to help progress patient care and improve the clinician experience. Advanced 3D modeling provides radiologists with additional views to help strengthen anatomical knowledge which could enhance clinical impact in reviewing complex,…
Everyone is unique – and so is human anatomy. Thus orthopaedics or implantology call for medical products that provide a perfect fit and demand is high for one-off components, or small production runs. At the same time, the materials used and manufacturing standards applied must fulfil extremely stringent quality control. This also holds for specialised surgical instruments and medical devices,…
In a spectacular development, Spanish researchers demonstrate for the first time that 3-D printing can be used to produce human skin deemed appropriate for transplants and testing applications.
Richard Wolf GmbH raises image quality in endoscopy to a new level with pin-sharp 4K resolution technology. The optimally tailored system components ensure image reproduction that matches the natural state of the image, at the same time operates energy efficient, and is ergonomic and compact.
Engineering researchers at the University of Minnesota have developed a revolutionary process for 3D printing stretchable electronic sensory devices that could give robots the ability to feel their environment. The discovery is also a major step forward in printing electronics on real human skin.
A team of researchers at Sahlgrenska Academy has managed to generate cartilage tissue by printing stem cells using a 3D-bioprinter. The fact that the stem cells survived being printed in this manner is a success in itself. In addition, the research team was able to influence the cells to multiply and differentiate to form chondrocytes (cartilage cells) in the printed structure.
‘It’s cheap, it’s accessible, and 3-D printing helps students to rapidly try out their product ideas,’ said Robert Webster, a visiting speaker at TU Delft from Vanderbilt University School of Engineering.
Installing a complete diagnostic radiology solution to network six sites of a hospital group, to process, manage and archive image data acquired across all modalities, is a ‘challenge’, acknowledged by Professor Dr Peter Landwehr, Medical Director of the Clinic for Diagnostic and Interventional Radiology of Diakovere Henriettenstift, Hanover, Germany. In 2010, he and his team overcame that…
At the 2nd International Conference on 3D Printing in Medicine from May 19-20, 2017 in Mainz, Germany, the focus is on innovative deployment options for the 3D print process in medicine. Today already, 3D printing is being applied in virtually all medical disciplines.
EDMA and Eucomed members have voted to dissolve their respective European associations. A new MedTech Europe single entity has been created, representing the European medical technology sector, from diagnosis to cure. The new MedTech Europe is operating immediately.
Carestream is highlighting the results of its collaboration with Materialise NV by showcasing a Web-based printing service, AnatomyPrint, which generates 3D anatomical models from STL files at RSNA (Booth #4704).
3-D printed tumour-like constructs will be used by a research team at Scotland’s Heriot-Watt University in Edinburgh, to raise research to a new level and successfully lead to new treatment options.
In the past, insoles for patients with diabetes were hand-made by orthopedic shoemakers. In the future, these specialist shoemakers will be able to produce insoles more cost-effectively thanks to new software and the use of 3D printers. This approach means the mechanical properties of each insole can be assessed scientifically and more effectively.
21st century technology has outpaced our expectations. One such example is the invention of advanced digital manufacturing techniques, better known as 3-D printing. Patients and the medical community are yet to see the full implementation of this technology within healthcare.
A Northwestern University research team has developed a 3D printable ink that produces a synthetic bone implant that rapidly induces bone regeneration and growth. This hyperelastic “bone” material, whose shape can be easily customized, one day could be especially useful for the treatment of bone defects in children.
‘Amputation v. reconstruction’ – a vital issue – was debated by two leading surgeons during the Microsurgical Lower Limb Reconstruction session at the Advances and Controversies in Reconstructive Microsurgery (ACRM) 2016 conference, held in the United Kingdom this May. Consultant Plastic Surgeon Umraz Khan, from North Bristol NHS Trust presented a plastic surgeon’s view, while Ben…
With a unique approach that draws on 3-D printing technologies, a team of University of Wisconsin–Madison researchers is developing new tools for understanding how ovarian cancer develops in women.
3-D print technology is expanding to cardiology surgery and interventional procedures. Research is scarce in Europe but a group of Spain-based cardiologists are currently developing 3-D print models to assess their value in the heart.
Doctors and scientists at Intermountain Medical Center in Salt Lake City printed and used a 3D kidney to help save a patient's organ during a complicated tumor-removal procedural. The 3D-printed model allowed doctors to study the patient's kidney in 3D to determine how to best remove the tumor as it was located in a precarious location adjacent to vital arteries and veins. Thanks to the model of…
To make a good framework for filling in missing bone, mix at least 30 percent pulverized natural bone with some special man-made plastic and create the needed shape with a 3D printer. That’s the recipe for success reported by researchers at The Johns Hopkins University.
The Materialise Mimics Care Suite is an open and flexible platform that includes planning and design software tools, 3D printed anatomical models and surgical guides, and patient-specific implants. Launched during AAOS, the American Association of Orthopaedic Surgeon’s Annual Meeting, the Suite also introduces Materialise Mimics inPrint, a new software solution that enables surgeons to create…
Studying a new type of pinhead-size, lab-grown brain made with technology first suggested by three high school students, Johns Hopkins researchers have confirmed a key way in which Zika virus causes microcephaly and other damage in fetal brains: by infecting specialized stem cells that build its outer layer, the cortex.
What started as a stuffy-nose and mild cold symptoms for 15-year-old Parker Turchan led to a far more serious diagnosis: a rare type of tumor in his nose and sinuses that extended through his skull near his brain. “He had always been a healthy kid, so we never imagined he had a tumor,” said Parker’s father, Karl. “We didn’t even know you could get a tumor in the back of your nose.”
Identifying a blood disorder may be as easy as running a blood sample from a finger prick under a smartphone. That is the concept behind a new biomedical device being developed by Kansas State University researchers.
A pioneer in cone beam computed tomography (CBCT) imaging, NewTom recently introduced the only CBCT system with an open gantry and supine positioning, which the firm reports is ‘…ideal for a host of diagnostic needs. Exceeding the limits posed by CT systems, the NewTom 5G XL combines high diagnostic resolution with minimum patient exposure.’
The CSI Congress (Congenital, Structural and Valvular Interventions) is one of the major fixtures for catheter therapy of congenital and structural heart defects. Key moments in this high profile event are live broadcasts and the audience can not only to listen to but also interact with the teams in the cath labs involved.
This year at MEDICA, Sony Healthcare Solutions builds on its position in the market as a leading provider of medical imaging technologies. Sony will demonstrate the power and impact visual solutions have in the world of medicine, from pre-operative diagnosis and the latest 4K surgical imaging through 4K over IP distribution up to education, post-surgical review and long archive storage.
With 3-D printing revolutionising manufacturing, its healthcare potential is being explored for medical devices, prosthetics, dentistry and drug development. One area under the spotlight is the creation of artificial muscles using a 3-D printing system. Dr Fergal Coulter, who has played an important role in helping develop the technique, outlined the manufacturing process, which he invented for…
Megan Thompson was about 30 weeks pregnant when an ultrasound showed a walnut-sized lump on her tiny, unborn child’s face that could prevent him from breathing after birth. Thompson was referred to the University of Michigan’s C.S. Mott Children’s Hospital where doctors had to decide whether baby Conan could be delivered safely through a C-section or needed a rare and complex lifesaving…
When surgical residents need to practice a complicated procedure to fashion a new ear for children without one, they typically get a bar of soap, carrot or an apple. To treat children with a missing or under-developed ear, experienced surgeons harvest pieces of rib cartilage from the child and carve them into the framework of a new ear. They take only as much of that precious cartilage as they…
Autografts, the gold standard of bone grafts, have several limitations. As a result, new orthobiologics products are being developed for the benefit of patients as well as surgeons. Innovations in biomaterials and graft design have enabled these advanced products that mimic the natural human bone and speed up bone repair and regeneration.
Researchers are using computed tomography (CT) and 3-D printing technology to recreate life-size models of patients' heads to assist in face transplantation surgery.
The treatment of cerebral aneurysms is often very complex and initially it is not always obvious which type of treatment is best suited for an individual case. In October, during the Annual Congress of the German Society for Neuroradiology e.V., a working group from Hamburg introduced a procedure that enables the production of exact copies of individual aneurysms with a 3D printer.
In September 2015, Utrecht University and University Medical Center (UMC) Utrecht will begin offering a two-year Biofabrication research master’s program in partnership with three foreign universities.
Medical technology still is among the fastest growing industries worldwide. However, the growth of the demand volume even in emerging markets is less based on volume expansion but more driven by targeted investments in modern systems and procedures.
We are very pleased to introduce our new Exercise Stress Test System CARDIOVIT CS-200 Touch which can perform multiple clinical tests: 12-/16-channel resting and exercise ECG, Holter ECG and 24h ABPM.
In the meantime, the Compamed Spring forum has become as much a part of the furniture as the Compamed in Düsseldorf - the leading international specialist trade fair for suppliers to the medical technology industry which has been held every year in November since 1992.
CS-200: SCHILLER´s complete Diagnostic Solution has been redesigned, offering now even more added value. Discreet but important external modifications encompass a large, swivel-mounted 19`` monitor, as well as an ergonomic design. A new, simplified user-interface as well as various new holders and mounting kits for external devices such as gel bottles, bar code scanners, spirometry sensors and…
Early suspicions of cancer, either from clinical evidence or medical imaging, are often followed up on biopsy. However, the removal of tissue for histological analysis can be uncomfortable for patients.
A comprehensive knowledge of the topographic relationships of anatomical structures is a must for all doctors.
XL, an exclusive, dry, long film for use in the Horizon XL printer - currently the only digital long film imager on the market - promises to not only to reduce costs, save space, and completely eliminate wet film processing needs, but also to enhance orthopaedic studies of paediatric and adult spines, scoliosis and long bone hip-to-ankle.
With iSyntax Philips Medical Systems provides a PACS for an advanced medical image and information management system.
The latest issue of EUROPEAN HOSPITAL is here! We cover the advance of 3D printing into medical mainstream, the latest developments in women's health, pitfalls in doctor-patient communication, and much more. Click here to read the ePaper.
