3D printed baby manikin
3D printed baby manikin

Source: Eindhoven University of Technology

News • Be prepared

This 3D printed baby dummy could improve resuscitation training

Two millions: this is, worldwide, the number of babies which suffer suffocation during birth every year. A resuscitation procedure is sometimes the key to avert irreparable damages for the baby. And, for successful outcomes, promptness of action and preparation are vital.

Researcher Mark Thielen (Industrial Design) from the Eindhoven University of Technology (TU/e) developed a 3D printed baby dummy, based on an MRI scan of a real newborn baby. The manikin is made of 3D printed organs and chest bones, and a mock circulatory system. For the neonatologists of the Maxima MC of Veldhoven, the manikin offers a much more realistic feeling during the training of the resuscitation procedure than previously used ones, and, as an added value, the real-time monitoring of vital signals such as blood pressure and heart rate during resuscitation.

portrait of mark thielen
Mark Thielen, PhD candidate at industrial Design at TU/e
Source: Eindhoven University of Technology

Each year, worldwide, approximately one million babies die during birth due to due to a shortage of oxygen that occurs during birth. Additionally, one million babies suffer consequences which vary, depending on the duration of oxygen deprivation, from minor neurological abnormalities to, unfortunately, irreparable brain damage. Direct resuscitation - opening the airway, ventilating the lungs and performing chest compressions - can minimize the consequences of suffocation through birth.

Recommended article

Photo

News • Pediatric resuscitation

Blindfolded training could help doctors save young lives

In a simulation training study, pediatric team leaders who wore a blindfold improved their leadership skills ratings by 11% over the course of 3 resuscitation scenarios, versus 5% for non-blindfolded leaders. Published in Frontiers in Pediatrics, the findings demonstrate a promising tool for improving training and outcomes in pediatric resuscitation. “Our study suggests that blindfolding the…

Squeaky springs

Neonatologists, gynecologists and midwives are currently training these skills on resuscitation manikins. Although the manikins should be replacements for the real child, there is little resemblance on the inside. ‘They have a purely mechanical design, which is optimized for massive production: cheap and indestructible’, explains Thielen. And, a mechanical internal construction, with squeaking springs and plastic plates, is surely not how humans are biologically composed. ‘When doctors practice using these manikins’, he wonders, ‘do they actually learn the right feeling? And, without measuring blood and air flow, can we determine the quality of the training?’

Segmentation of the MRI image of the rib cage (red) and cartilage structure...
Segmentation of the MRI image of the rib cage (red) and cartilage structure (yellow)

Source: Eindhoven University of Technology

Newborn from the printer

For his PhD project, Thielen designed and built a new resuscitation manikin, based on an MRI scan of a full-term infant. Using a 3D printer he made replicas of the bone structure - consisting of strong, flexible plastics - and molds of the heart, lungs, muscle, fat and skin tissue, in various soft silicone types. The entire manikin was printed down to the last detail.

‘3D printing the rib cage was a real challenge, an enormous effort that required months of work’, says Thielen. ‘I spent hours and hours identifying the borders of every single bone in the MRI images, slice by slice. Often, having the images analyzed automatically by an image software gave unsatisfactory results, so I had to restart from scratch and do everything manually’. A lot of attention was also paid to the 3D printing of the heart, a model consisting of four internal spaces with even four heart valves.

When manikins look like dolls, the trainees can be easily distracted and lose their concentration, rendering the training less efficient

Sidarto Bambang Oetomo

The new design incorporates a variety of sensors to measure the quality of resuscitation. For example, the jaw contains position sensors to monitor the opening of the airway, while blood pressure and flow sensors have been placed in the heart to measure the effectiveness and quality of the cardiac massage. The final integration of the artificial vascular system into the manikin still requires further miniaturization of the circulation system.

The resistance and flexibility of the heart and rib cage are measured in the new manikin and compared to real babies and rabbits, which are comparable in anatomy and size. For Sidarto Bambang Oetomo, pediatrician in neonatology specialized in innovations for premature babies who has for long worked at the Maxima MC of Veldhoven and as a part-time professor at TU/e,  the new manikin is a big step towards realistic behavior, which can ‘improve the quality of the resuscitation training’. ‘When manikins look like dolls’, he explains, ‘the trainees can be easily distracted and lose their concentration, rendering the training less efficient’. Doctors and nurses from Maxima MC who participated in a sensory study also indicated that the realistic sensory value during the resuscitation of the new manikin was much higher than with current manikins.

The manikin developed by Thielen is especially meant for hospitals of developing countries, where most of the premature births occur.  ‘As such’, he explains, ‘affordability is one of the biggest prerequisites’. The first prototype of Thielen, now developed at a cost of approximately 5000 euros, is slightly more expensive than its simpler and purely mechanic alternatives. Yet, it still represents a cheap alternative to very sophisticated manikins, which could costs up to 50.000 euros. And, Thielen is already thinking of short term solutions to cut down the costs even further. Thielen: ‘Nowadays, the shipping of products worldwide is common practice. I am dreaming of my 3D printed baby being borrowed all over the world, wherever needed, and at a much cheaper, rental price’.


Source: Eindhoven University of Technology

09.05.2019

Related articles

Photo

Video • Improving first aid

New 3D CT scanning method shows what happens during CPR

Rapid first aid during cardiac arrest makes the difference between life and death. But what happens to the heart and the internal organs when people come running and begin to give well-meaning but…

Photo

Article • ECR 2019

The impact of 3D printing in radiology

With increased precision, speed of service and reduced cost, 3D printing presents an opportunity to transform traditional healthcare and its delivery, and radiology is at the center of this new…

Photo

News • Pediatric resuscitation

Blindfolded training could help doctors save young lives

In a simulation training study, pediatric team leaders who wore a blindfold improved their leadership skills ratings by 11% over the course of 3 resuscitation scenarios, versus 5% for non-blindfolded…

Related products

Subscribe to Newsletter