Stem cell research

3D bioprinting of cartilage could soon be a reality

A team of researchers at Sahlgrenska Academy has managed to generate cartilage tissue by printing stem cells using a 3D-bioprinter. The fact that the stem cells survived being printed in this manner is a success in itself. In addition, the research team was able to influence the cells to multiply and differentiate to form chondrocytes (cartilage cells) in the printed structure.

Stina Simonsson, Associate Professor of Cell Biology, lead the research...
Stina Simonsson, Associate Professor of Cell Biology, lead the research team’s efforts.
Source: Elin Lindström Claessen

The research project is being conducted in collaboration with a team of researchers at the Chalmers University of Technology who are experts in the 3D printing of biological materials. Orthopedic researchers from Kungsbacka are also involved in the research collaboration. The team used cartilage cells harvested from patients who underwent knee surgery, and these cells were then manipulated in a laboratory, causing them to rejuvenate and revert into “pluripotent” stem cells, i.e. stem cells that have the potential to develop into many different types of cells. The stem cells were then expanded and encapsulated in a composition of nanofibrillated cellulose and printed into a structure using a 3D bioprinter. Following printing, the stem cells were treated with growth factors that caused them to differentiate correctly, so that they formed cartilage tissue.

Tricked into thinking that they aren’t alone

The publication in Scientific Reports is the result of three years of hard work. “In nature, the differentiation of stem cells into cartilage is a simple process, but it’s much more complicated to accomplish in a test tube. We’re the first to succeed with it, and we did so without any animal testing whatsoever," says Stina Simonsson, Associate Professor of Cell Biology, who lead the research team’s efforts. Most of the team’s efforts had to do with finding a procedure so that the cells survive printing, multiply and a protocol that works that causes the cells to differentiate to form cartilage. "We investigated various methods and combined different growth factors. Each individual stem cell is encased in nanocellulose, which allows it to survive the process of being printed into a 3D structure. We also harvested mediums from other cells that contain the signals that stem cells use to communicate with each other so called conditioned medium. In layman’s terms, our theory is that we managed to trick the cells into thinking that they aren’t alone,” clarifies Stina Simonsson. Therefore the cells multiplied before we differentiated them. A key insight gained from the team’s study is that it is necessary to use large amounts of live stem cells to form tissue in this manner.

The cartilage formed by the stem cells in the 3D bioprinted structure is extremely similar to human cartilage. Experienced surgeons who examined the artificial cartilage saw no difference when they compared the bioprinted tissue to real cartilage, and have stated that the material has properties similar to their patients’ natural cartilage. Just like normal cartilage, the lab-grown material contains Type II collagen, and under the microscope the cells appear to be perfectly formed, with structures similar to those observed in samples of human-harvested cartilage.

Potential for use in osteoarthritis therapies

The study represents a giant step forward in the ability to generate new, endogenous cartilage tissue. In the not too distant future, it should be possible to use 3D bioprinting to generate cartilage based on a patient’s own, “backed-up” stem cells. This bioprinted tissue can be used to repair cartilage damage, or to treat osteoarthritis, in which joint cartilage degenerates and breaks down. The condition is very common – one in four Swedes over the age of 45 suffer from some degree of osteoarthritis.

In theory, this research has created the opportunity to generate large amounts of cartilage, but one major issue must be resolved before the findings can be used in practice to benefit patients. “The structure of the cellulose we used might not be optimal for use in the human body. Before we begin to explore the possibility of incorporating the use of 3D bioprinted cartilage into the surgical treatment of patients, we need to find another material that can be broken down and absorbed by the body so that only the endogenous cartilage remains, the most important thing for use in a clinical setting is safety” explains Stina Simonsson.

 

Source: University of Gothenburg

02.05.2017

Read all latest stories

Related articles

Photo

Bioprinting

Producing tissue and organs through lithography

The production of artificial organs is a hot research topic. In the near future, artificial organs will compensate for the lack of organ donations and replace animal experiments. Although there are…

Photo

Bioprinting

3D printing of biological tissue

The future of medicine is biological – and scientists hope we will soon be using 3D-printed biologically functional tissue to replace irreparably damaged tissue in the body. A team of researchers…

Photo

‘Mini-Brains’: Evidence of Zika’s toll on fetal cortex

Studying a new type of pinhead-size, lab-grown brain made with technology first suggested by three high school students, Johns Hopkins researchers have confirmed a key way in which Zika virus causes…

Related products

Agfa HealthCare – Drystar 5301

Printer

Agfa HealthCare – Drystar 5301

Agfa HealthCare
Agfa HealthCare – Drystar 5302

Printers

Agfa HealthCare – Drystar 5302

Agfa HealthCare
Agfa HealthCare – Drystar 5503

Printers

Agfa HealthCare – Drystar 5503

Agfa HealthCare
Agfa HealthCare – Drystar Axys

Printers

Agfa HealthCare – Drystar Axys

Agfa HealthCare
DTM Medical – Primera Signature Slide Printer

Printer

DTM Medical – Primera Signature Slide Printer

Primera Technology Europe