Video • Tissue construct

A 'swift' way to 3D-print organs

Twenty people die every day waiting for an organ transplant in the U.S., and while more than 30,000 patients now receive transplants annually, another 113,000 are currently on organ waitlists.

Many people see artificially grown human organs as the Holy Grail for resolving the organ shortage, and advances in 3D printing have led to a boom in using that technique to build living tissue constructs in the shape of human organs. However, all 3D-printed human tissues to date lack the cellular density and organ-level functions they need to be used in organ repair and replacement. Now, a new technique called SWIFT (sacrificial writing into functional tissue) created by researchers from Harvard’s Wyss Institute for Biologically Inspired Engineering and the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) overcomes that major hurdle by 3D-printing vascular channels into living matrices composed of stem-cell-derived organ building blocks (OBBs). The technique yields viable, organ-specific tissues with high cell density and function. The research is reported in Science Advances.

Photo
Densely cellular tissue constructs are stained in green marking living cells and red marking dead. The image on top is without embedded vascular channels and one below is with the channels.

Image credit: Wyss Institute at Harvard University

                                                            

“This is an entirely new paradigm for tissue fabrication,” said co-first author Mark Skylar-Scott, a research associate at the Wyss Institute. “Rather than trying to 3D-print an entire organ’s worth of cells, SWIFT focuses on only printing the vessels necessary to support a living tissue construct that contains large quantities of OBBs, which may ultimately be used therapeutically to repair and replace human organs with lab-grown versions containing patients’ own cells.”

SWIFT involves a two-step process that begins with forming hundreds of thousands of stem-cell-derived aggregates into a dense, living matrix of organ building blocks that contains about 200 million cells per milliliter. Next, a vascular network through which oxygen and other nutrients can be delivered to the cells is embedded within the matrix by writing and removing a sacrificial ink.

“Forming a dense matrix from these OBBs kills two birds with one stone: Not only does it achieve a high cellular density akin to that of human organs, but the matrix’s viscosity also enables printing of a pervasive network of perfusable channels within it to mimic the blood vessels that support human organs,” said co-first author Sébastien Uzel, a research associate at the Wyss Institute and SEAS.

The cellular aggregates used in the SWIFT method are derived from adult induced pluripotent stem cells, which are mixed with a tailored extracellular matrix (ECM) solution to make a living matrix that is compacted viacentrifugation. At cold temperatures (zero to 4 degrees Celsius), the dense matrix has the consistency of mayonnaise – soft enough to manipulate without damaging the cells, but thick enough to hold its shape – making it the perfect medium for sacrificial 3D printing. In this technique, a thin nozzle moves through the matrix depositing a strand of gelatin “ink” that pushes cells out of the way without damaging them.

Photo
This image sequence shows a pervasive, branching network of vascular channels (red) printing within a densely cellular tissue matrix via SWIFT.

Credit: Wyss Institute at Harvard University

When the cold matrix is heated to 37 degrees, it stiffens to become more solid (like an omelet being cooked), while the gelatin ink melts and can be washed out, leaving behind a network of channels embedded within the tissue construct that can be perfused with oxygenated media to nourish the cells. The researchers were able to vary the diameter of the channels from 400 micrometers to 1 millimeter, and seamlessly connected them to form branching vascular networks within the tissues.

Organ-specific tissues that were printed with embedded vascular channels using SWIFT and perfused in this manner remained viable, while tissues grown without these channels experienced cell death in their cores within 12 hours. To see whether the tissues displayed organ-specific functions, the team printed, evacuated, and perfused a branching channel architecture into a matrix consisting of heart-derived cells and flowed media through the channels for more than a week. During that time, the cardiac OBBs fused together to form a more solid cardiac tissue whose contractions became more synchronous and more than 20 times stronger, mimicking key features of a human heart.

“Our SWIFT biomanufacturing method is highly effective at creating organ-specific tissues at scale from OBBs ranging from aggregates of primary cells to stem-cell-derived organoids,” said corresponding author Jennifer Lewis, who is a core faculty member at the Wyss Institute as well as the Hansjörg Wyss Professor of Biologically Inspired Engineering at SEAS. “By integrating recent advances from stem-cell researchers with the bioprinting methods developed by my lab, we believe SWIFT will greatly advance the field of organ engineering around the world.”

Collaborations are underway with Wyss Institute faculty members Chris Chen at Boston University and Sangeeta Bhatia at MIT to implant these tissues into animal models and explore their host integration, as part of the 3D Organ Engineering Initiative co-led by Lewis and Chen.

“The ability to support living human tissues with vascular channels is a huge step toward the goal of creating functional human organs outside of the body,” said Wyss Institute Director Donald Ingber, who is also the Judah Folkman Professor of Vascular Biology at HMS, the Vascular Biology Program at Boston Children’s Hospital, and professor of bioengineering at SEAS. “We continue to be impressed by the achievements in Jennifer’s lab, including this research, which ultimately has the potential to dramatically improve both organ engineering and the lifespans of patients whose own organs are failing.”


Source: Harvard University

09.09.2019

Read all latest stories

Related articles

Photo

News • New approach to replacement tissue

3D printing of artificial cartilage

Material scientists at TU Wien (Vienna) have developed a new approach to producing artificial cartilage tissue: using a 3D printer, cells are grown in microstructures.

Photo

News • Novel manufacturing technique

3D printed heart valves to support tissue growth

Researchers have developed 3D printed artificial heart valves designed to allow a patient’s own cells to form new tissue.

Photo

News • Freefrom Reversible Embedding of Suspended Hydrogels

A 'FRESH' way to 3D-print tissues and organs

Research into 3D bioprinting has grown rapidly in recent years as scientists seek to re-create the structure and function of complex biological systems from human tissues to entire organs. The most…

Related products

Subscribe to Newsletter