Search for: "3D printing" - 89 articles found

Photo

Reduced complications, death

COVID-19: The benefits of vitamin D

Adequate levels of vitamin D reduces complications and deaths among COVID-19 patients, reveals new research performed at the Boston University School of Medicine. Hospitalized COVID-19 patients who were vitamin D sufficient, with a blood level of 25-hydroxyvitamin D of at least 30 ng/mL (a measure of vitamin D status), had a significant decreased risk for adverse clinical outcomes including…

Photo

Gels for drug delivery systems

'Soft' 3D printing could jump-start creation of tiny medical devices

Researchers at the U.S. National Institute of Standards and Technology (NIST) have developed a new method of 3D-printing gels and other soft materials. Published in a new paper, it has the potential to create complex structures with nanometer-scale precision. Because many gels are compatible with living cells, the new method could jump-start the production of soft tiny medical devices such as…

Photo

Prototype

Portable point-of-care for Covid-19 tests

As COVID-19 continues to spread, bottlenecks in supplies and laboratory personnel have led to long waiting times for results in some areas. In a new study, University of Illinois, Urbana-Champaign researchers have demonstrated a prototype of a rapid COVID-19 molecular test and a simple-to-use, portable instrument for reading the results with a smartphone in 30 minutes, which could enable…

Photo

Rapidly meeting a surging demand

The science behind 3-D printed nasal swabs

Medical device approved 3-D printers are producing clinically safe and effective nasopharyngeal swabs for COVID-19 testing. A nasal swab may seem rudimentary, but is essential for testing COVID-19. Diagnostic test kits and components – nasal swabs, collection vials, and chemical reagents – have been in short supply worldwide, especially in March. Ironically, nasopharyngeal swabs are…

Photo

3D microprinted scope

World’s smallest imaging device focuses on heart disease

A team of researchers led by the University of Adelaide and University of Stuttgart has used 3D micro-printing to develop the world’s smallest, flexible scope for looking inside blood vessels. The camera-like imaging device can be inserted into blood vessels to provide high quality 3D images to help scientists better understand the causes of heart attack and heart disease progression, and could…

Photo

Acetone sensors

3D printing sensors for diabetes breath tests

The production of highly sensitive sensors is a complex process: it requires many different steps and the almost dust-free environment of special cleanrooms. A research team from Materials Science at Kiel University (CAU) and from Biomedical Engineering at the Technical University of Moldova has now developed a procedure to produce extremely sensitive and energy-efficient sensors using 3D…

Photo

Diabetes-related diseases

3D printed implants for personalized treatment of bone defects

BellaSeno GmbH, a company developing absorbable scaffolds using additive manufacturing technologies, announced a collaboration with Charité – Universitätsmedizin Berlin under the recently established SyMBoD consortium. Under the agreement, BellaSeno will design and manufacture personalized, 3D-printed, absorbable implants suitable for the treatment of diabetes patients with bone defects. The…

Photo

Smart algorithm

Automated analysis of whole brain vasculature

Diseases of the brain are often associated with typical vascular changes. Now, scientists at LMU University Hospital Munich, Helmholtz Research Centre for Environmental Health and the Technical University of Munich (TUM) have come up with a technique for visualising the structures of all the brain's blood vessels – right down to the finest capillaries – including any pathological changes. So…

Photo

Glioblastoma

New imaging technique to study 3D printed brain tumors

Glioblastomas are complex, fast-growing malignant brain tumors that are made up of various types of cells. Even with aggressive treatment — which often includes surgery, radiation, and chemotherapy — glioblastomas are difficult to treat, leading to an average survival of 11-15 months. In research published in Science Advances, Xavier Intes, a professor of biomedical engineering at Rensselaer,…

Photo

'ScoliBot' offers superhuman precision

New robots improve spinal straightening

ScoliBot, a new robotic system, could perform spinal surgery to a higher degree of accuracy than human counterparts. Devised by a team from Nottingham Trent University (NTU), the system has two robotic arms that semi-autonomously drill holes in individual vertebrae in procedures to straighten the spines of patients with conditions such as scoliosis or kyphosis. Leading the project, Professor…

Photo

Hope for new skin grafts

3D printed living skin complete with blood vessels

Researchers at Rensselaer Polytechnic Institute have developed a way to 3D print living skin, complete with blood vessels. The advancement, published in Tissue Engineering Part A, is a significant step toward creating grafts that are more like the skin our bodies produce naturally. “Right now, whatever is available as a clinical product is more like a fancy Band-Aid,” said Pankaj Karande, an…

Photo

New ideas

MEDICA becomes number one trade fair for health start-ups

Healthcare is going digital worldwide at an incredibly rapid pace. More and more applications for prevention, diagnostics and therapy are being made into apps (with matching hardware) for smartphones and tablets or are even available as wearables for direct use on the body. Digitalisation is also striding forward in Germany, where doctors, therapists and patients still take a fairly analogue…

Photo

Tissue construct

A 'swift' way to 3D-print organs

Twenty people die every day waiting for an organ transplant in the U.S., and while more than 30,000 patients now receive transplants annually, another 113,000 are currently on organ waitlists. Many people see artificially grown human organs as the Holy Grail for resolving the organ shortage, and advances in 3D printing have led to a boom in using that technique to build living tissue constructs…

Photo

Let it grow

3D printed templates for bone implants made of salt

With the help of a 3D printed salt template, ETH researchers from ETH Zurich have succeeded in producing magnesium scaffolds with structured porosity that are suitable for bioresorbable bone implants. For the treatment of complex bone fractures or even missing bone parts, surgeons typically deploy metal implants. In this context, an attractive alternative to the traditional materials like…

Photo

Microstents vs foetal urethral strictures

The world’s smallest stent

Researchers at ETH Zurich have developed a new method for producing malleable microstructures – for instance, vascular stents that are 40 times smaller than previously possible. In the future, such stents could be used to help to widen life-threatening constrictions of the urinary tract in foetuses in the womb. Approximately one in every thousand children develops a urethral stricture,…

Photo

Biocompatible alternative

Non-silicone breast implant to enter clinical trial

Surgery complications, implant rupture, tissue contractures or even plain immune intolerance – silicone breast implants can cause a variety of unfavourable conditions. Because of this, many women think twice about breast augmentation. A new kind of implant might change this up a bit. BellaSeno GmbH, a company developing absorbable implants using additive manufacturing technology, now announced…

Photo

Tailor-made

Artificial heart valves from silicone

Scientists at ETH Zürich and the South African company Strait Access Technologies are using 3D printing to produce custom-made artificial heart valves from silicone. This could help meet an ageing population’s growing demand for replacement heart valves. The human heart has four chambers, each equipped with a valve to ensure blood flow in one direction only. If any of the heart valves are…

Photo

Bioprinting

Producing tissue and organs through lithography

The production of artificial organs is a hot research topic. In the near future, artificial organs will compensate for the lack of organ donations and replace animal experiments. Although there are already promising experiments with 3D printers that use a „bio-ink“ containing living cells, a functional organ has never been created in this way. A European consortium coordinated by Dr Elena…

Photo

Medical components

New CT tubes deliver excellent performance and support patient throughput

Dunlee, a leading provider of CT, X-ray, MR, and 3D-printed tungsten products for the OEM market and CT tubes for the replacement market, continues to add to its wide CT tube portfolio with the introduction of the CT5000 mid-level CT tube and the CTR1600 series entry-level CT tubes. These tubes are manufactured to Dunlee’s exacting standards and boast excellent performance in their market…

Photo

New products

Dunlee expands MR portfolio with Invivo MR coils

Dunlee, a leading provider of CT, X-ray, MR and 3D-printed tungsten products for the OEM market, is expanding its portfolio of MR products with Invivo MR coils for breast, lungs, neuro, cardiac and orthopedic applications. The Invivo coil family includes coils designed for a range of anatomies, element counts, field strengths and imaging applications. Outstanding design boosts image quality while…

Photo

Be prepared

This 3D printed baby dummy could improve resuscitation training

Two millions: this is, worldwide, the number of babies which suffer suffocation during birth every year. A resuscitation procedure is sometimes the key to avert irreparable damages for the baby. And, for successful outcomes, promptness of action and preparation are vital. Researcher Mark Thielen (Industrial Design) from the Eindhoven University of Technology (TU/e) developed a 3D printed baby…

Photo

Bioprinting

3D printing of biological tissue

The future of medicine is biological – and scientists hope we will soon be using 3D-printed biologically functional tissue to replace irreparably damaged tissue in the body. A team of researchers from the Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB has been working with the University of Stuttgart for a number of years on a project to develop and optimize suitable…

Photo

Biotechnology

First ever 3D printed heart from a patient’s own cells

In a major medical breakthrough, Tel Aviv University researchers have "printed" the world's first 3D vascularised engineered heart using a patient's own cells and biological materials. Until now, scientists in regenerative medicine — a field positioned at the crossroads of biology and technology — have been successful in printing only simple tissues without blood vessels. "This…

Photo

ECR 2019

The impact of 3D printing in radiology

With increased precision, speed of service and reduced cost, 3D printing presents an opportunity to transform traditional healthcare and its delivery, and radiology is at the center of this new technology. In the ECR 2019 Special Focus Session “The 3D printing lab from bench to bedside”, the speakers emphasized that 3D printing does not only enable a new and innovative way to display imaging,…

Photo

Endoscopy RFA

New tool opens doors for pancreatic cancer treatment

A significantly more effective, minimally invasive treatment for pancreatic tumors may be on the horizon, thanks to a new endoscopy tool created in the Penn State Department of Mechanical Engineering. On average, only about 20 percent of pancreatic cancer patients are eligible for a surgical removal of the tumor, which is currently the most-effective treatment option. The location of the pancreas…

Photo

After larynx surgery

Voice prosthesis: Russian develops cheaper alternative

People who underwent larynx surgery face a necessity of a voice prosthesis implantation, but such artificial windpipes are only produced abroad. Scientists at the South Ural State University (SUSU) are developing a Russian analogue of such an apparatus which will be several times cheaper than the imported products. The problem of vocal rehabilitation after larynx is removed has been an issue ever…

Photo

Emerging Tech

Will 3D printing bring radiology to the next level?

As 3D printing technology continues to evolve, read how radiology will be involved in managing digital workflow related to patient care. “3D printing is a part of medicine, and radiology is at the center of this impactful new technology,” said RSNA 3D Printing Special Interest Group (SIG) Chair Jane Matsumoto, MD, assistant professor of radiology and co-director of the 3D Printing Lab at the…

Photo

From science fiction to reality

Researchers 3D print prototype for bionic eye

A team of researchers at the University of Minnesota have, for the first time, fully 3D printed an array of light receptors on a hemispherical surface. This discovery marks a significant step toward creating a “bionic eye” that could someday help blind people see or sighted people see better. The research is published in Advanced Materials, a peer-reviewed scientific journal covering…

Photo

Exhibition

Progress in medicine presented at Bulmedica/Buldental 2018

New products and technologies in medical practice expect the specialists of the leading international exhibition Bulmedica/Buldental from 16 to 18 May at Inter Expo Center. This year, the medical profile of the exhibition will focus on the progress in imaging, physiotherapy, aesthetic medicine. Once again Bulmedica/Buldental will be a platform to keep an eye on the tendencies, a meeting point of…

Photo

New report

Advanced development of primary pancreatic organoid tumor models for high-throughput phenotypic drug screening

A multidisciplinary team of scientists share recent advancements in innovative in-vitro cancer biology methods for screening drug-like molecules in cancer tissue relevant models in a new report published online ahead-of-print at SLAS Discovery. Entitled Advanced Development of Primary Pancreatic Organoid Tumor Models for High-Throughput Phenotypic Drug Screening, the report can be accessed for…

Photo

Equipment

A tiny, more cost-effective white blood cell counter might be available soon

A thin copper wire wrapped around a channel slightly thicker than a strand of hair could be the key to manufacturing a compact electronic device capable of counting white blood cells from the comfort of one’s home, a Kennesaw State University researcher says. Hoseon Lee, an assistant professor of electrical engineering in the Southern Polytechnic College of Engineering and Engineering…

Photo

Medical fair

Welcome to the 79th CMEF Spring Show! Register Now to Save CNY 100!

China International Medicinal Equipment Fair (CMEF), launched in 1979, is held twice annually – spring and autumn. After over 39 years of continuous innovation and self-improvement, CMEF has become the largest fair of medical devices, related products and services in the Asia-Pacific region. The fair widely covers 15,000 products such as medical imaging, IVD equipment and reagent, medical…

Photo

A discipline transforming

Adding value with AI in medical imaging

In the next five to 10 years, artificial intelligence is likely to fundamentally transform diagnostic imaging. This will by no means replace radiologists, but rather help to meet the rising demand for imaging examinations, prevent diagnostic errors, and enable sustained productivity increases.

Photo

Drug manufacturing

3D printing pharmaceuticals with this chemical ‘MP3 player’

A new method of drug manufacture which uses 3D printers to create pharmaceuticals on demand could lead to a ‘Spotify for chemistry’, scientists claim. In a new paper published in the journal Science, researchers from the University of Glasgow present for the first time a new approach to the manufacture of pharmaceuticals which can be made using a digital code. This code is used by a 3D…

Photo

"Stormram 4"

This 3D-printed robot could be the future of cancer treatment

Cancer surgeons perform an estimated 1.7 breast biopsies each year, according to the American Association of Preferred Provider Organizations. This makes the procedure a significant proportion of cases referred to anatomic pathologists. This surgery, however, is time-consuming and not always accurate due to shortcomings in existing surgical technology and to human error. Now, a 3D-printed…

Photo

Replicas

Researchers 3D print lifelike artificial organ models

A team of researchers led by the University of Minnesota has 3D printed lifelike artificial organ models that mimic the exact anatomical structure, mechanical properties, and look and feel of real organs. These patient-specific organ models, which include integrated soft sensors, can be used for practice surgeries to improve surgical outcomes in thousands of patients worldwide. “We are…

Photo

Innovative technology

3-D-printed prosthetic implants could improve hearing loss treatment

Researchers using CT scans and 3-D printing have created accurate, custom-designed prosthetic replacements for damaged parts of the middle ear, according to a study being presented at the annual meeting of the Radiological Society of North America (RSNA). The technique has the potential to improve a surgical procedure that often fails because of incorrectly sized prosthetic implants, researchers…

Photo

Cooperation

Philips teams with 3D printing industry leaders 3D Systems and Stratasys

Royal Philips, a global leader in health technology, announced agreements with 3D Systems and Stratasys, two global leaders in the 3D printing industry, to help progress patient care and improve the clinician experience. Advanced 3D modeling provides radiologists with additional views to help strengthen anatomical knowledge which could enhance clinical impact in reviewing complex,…

Photo

Individuals for individuals

Printing 3-D human parts

Everyone is unique – and so is human anatomy. Thus orthopaedics or implantology call for medical products that provide a perfect fit and demand is high for one-off components, or small production runs. At the same time, the materials used and manufacturing standards applied must fulfil extremely stringent quality control. This also holds for specialised surgical instruments and medical devices,…

Photo

ENDOCAM Logic 4K

The new Sharp. The new Authentic. The new Efficient.

Richard Wolf GmbH raises image quality in endoscopy to a new level with pin-sharp 4K resolution technology. The optimally tailored system components ensure image reproduction that matches the natural state of the image, at the same time operates energy efficient, and is ergonomic and compact.

Photo

Stem cell research

3D bioprinting of cartilage could soon be a reality

A team of researchers at Sahlgrenska Academy has managed to generate cartilage tissue by printing stem cells using a 3D-bioprinter. The fact that the stem cells survived being printed in this manner is a success in itself. In addition, the research team was able to influence the cells to multiply and differentiate to form chondrocytes (cartilage cells) in the printed structure.

Photo

Diagnostic radiology solution

Going fully digital in a single key stroke

Installing a complete diagnostic radiology solution to network six sites of a hospital group, to process, manage and archive image data acquired across all modalities, is a ‘challenge’, acknowledged by Professor Dr Peter Landwehr, Medical Director of the Clinic for Diagnostic and Interventional Radiology of Diakovere Henriettenstift, Hanover, Germany. In 2010, he and his team overcame that…

Photo

Announcement

International Conference on 3D Printing in Medicine

At the 2nd International Conference on 3D Printing in Medicine from May 19-20, 2017 in Mainz, Germany, the focus is on innovative deployment options for the 3D print process in medicine. Today already, 3D printing is being applied in virtually all medical disciplines.

MedTech Europe

Medical technologies in EU become one new single entity

EDMA and Eucomed members have voted to dissolve their respective European associations. A new MedTech Europe single entity has been created, representing the European medical technology sector, from diagnosis to cure. The new MedTech Europe is operating immediately.

Photo

Additive manufacturing

3D printing: customized insoles for diabetes patients

In the past, insoles for patients with diabetes were hand-made by orthopedic shoemakers. In the future, these specialist shoemakers will be able to produce insoles more cost-effectively thanks to new software and the use of 3D printers. This approach means the mechanical properties of each insole can be assessed scientifically and more effectively.

Photo

Implants

Screws that fit the body’s notches

Complex bone fractures are often set with titanium or steel screws and plates. However, if these remain in the body for some time, they can cause health problems. A new bioceramic screw nail has the capacity of replacing the currently used metal components. It can be easily introduced into bone and does not have to be removed.

Photo

3D Printing

Promising biomaterial to build better bones

A Northwestern University research team has developed a 3D printable ink that produces a synthetic bone implant that rapidly induces bone regeneration and growth. This hyperelastic “bone” material, whose shape can be easily customized, one day could be especially useful for the treatment of bone defects in children.

Photo

Microsurgery

Lower limb trauma – reconstruction or amputation?

‘Amputation v. reconstruction’ – a vital issue – was debated by two leading surgeons during the Microsurgical Lower Limb Reconstruction session at the Advances and Controversies in Reconstructive Microsurgery (ACRM) 2016 conference, held in the United Kingdom this May. Consultant Plastic Surgeon Umraz Khan, from North Bristol NHS Trust presented a plastic surgeon’s view, while Ben…

Photo

Tumor removal

3D printed kidney helps save woman's organ

Doctors and scientists at Intermountain Medical Center in Salt Lake City printed and used a 3D kidney to help save a patient's organ during a complicated tumor-removal procedural. The 3D-printed model allowed doctors to study the patient's kidney in 3D to determine how to best remove the tumor as it was located in a precarious location adjacent to vital arteries and veins. Thanks to the model of…

Photo

Within hospitals

Improve the integration of certified medical 3D printing

The Materialise Mimics Care Suite is an open and flexible platform that includes planning and design software tools, 3D printed anatomical models and surgical guides, and patient-specific implants. Launched during AAOS, the American Association of Orthopaedic Surgeon’s Annual Meeting, the Suite also introduces Materialise Mimics inPrint, a new software solution that enables surgeons to create…

Photo

Oncology

How printing a 3-D skull helped save a real one

What started as a stuffy-nose and mild cold symptoms for 15-year-old Parker Turchan led to a far more serious diagnosis: a rare type of tumor in his nose and sinuses that extended through his skull near his brain. “He had always been a healthy kid, so we never imagined he had a tumor,” said Parker’s father, Karl. “We didn’t even know you could get a tumor in the back of your nose.”

Photo

CSI

3-D printed hearts

The CSI Congress (Congenital, Structural and Valvular Interventions) is one of the major fixtures for catheter therapy of congenital and structural heart defects. Key moments in this high profile event are live broadcasts and the audience can not only to listen to but also interact with the teams in the cath labs involved.

Photo

MEDICA 2015

Power and impact of visual solutions

This year at MEDICA, Sony Healthcare Solutions builds on its position in the market as a leading provider of medical imaging technologies. Sony will demonstrate the power and impact visual solutions have in the world of medicine, from pre-operative diagnosis and the latest 4K surgical imaging through 4K over IP distribution up to education, post-surgical review and long archive storage.

Photo

Revolution

3-D printed muscles

With 3-D printing revolutionising manufacturing, its healthcare potential is being explored for medical devices, prosthetics, dentistry and drug development. One area under the spotlight is the creation of artificial muscles using a 3-D printing system. Dr Fergal Coulter, who has played an important role in helping develop the technique, outlined the manufacturing process, which he invented for…

Photo

Pediatrics

3D printed fetal head helps manage care for baby

Megan Thompson was about 30 weeks pregnant when an ultrasound showed a walnut-sized lump on her tiny, unborn child’s face that could prevent him from breathing after birth. Thompson was referred to the University of Michigan’s C.S. Mott Children’s Hospital where doctors had to decide whether baby Conan could be delivered safely through a C-section or needed a rare and complex lifesaving…

Photo

Scientist designs bio-inspired robotic finger

Most robotic parts used today are rigid, have a limited range of motion and don’t really look lifelike. Inspired by both nature and biology, a scientist from Florida Atlantic University has designed a novel robotic finger that looks and feels like the real thing. In an article recently published in the journal Bioinspiration & Biomimetics, Erik Engeberg, Ph.D., assistant professor in the…

Photo

3D printing

Techniques help surgeons carve new ears

When surgical residents need to practice a complicated procedure to fashion a new ear for children without one, they typically get a bar of soap, carrot or an apple. To treat children with a missing or under-developed ear, experienced surgeons harvest pieces of rib cartilage from the child and carve them into the framework of a new ear. They take only as much of that precious cartilage as they…

Photo

DNA

Keeping the cellular production line on track

When our cells copy their DNA to grow and replicate, it’s vital the process runs smoothly. To get this right, cells use a complex “machine”, made from many hundreds of components. This machine is built afresh, moment by moment as it’s needed during the copying process. This assembly–de-assembly is vital to accurate and efficient copying.

Photo

Navigated Augmented Reality enhances medical applications

The digital world is being enriched by augmented reality (AR), which refers to any type of information offering the user additional help. Mostly, we don’t even notice it; the only external sign being Smart glasses. When new cars are launched we are always surprised by the constantly developing assistance systems they offer – and it’s the same for the growing number of smartphone…

Photo

Research

3D printers help neuroradiologists

The treatment of cerebral aneurysms is often very complex and initially it is not always obvious which type of treatment is best suited for an individual case. In October, during the Annual Congress of the German Society for Neuroradiology e.V., a working group from Hamburg introduced a procedure that enables the production of exact copies of individual aneurysms with a 3D printer.

Photo

CARDIOVIT CS-200 - new design and additional features

CS-200: SCHILLER´s complete Diagnostic Solution has been redesigned, offering now even more added value. Discreet but important external modifications encompass a large, swivel-mounted 19`` monitor, as well as an ergonomic design. A new, simplified user-interface as well as various new holders and mounting kits for external devices such as gel bottles, bar code scanners, spirometry sensors and…

Photo

Exclusive dry long film for digital CR/DR

XL, an exclusive, dry, long film for use in the Horizon XL printer - currently the only digital long film imager on the market - promises to not only to reduce costs, save space, and completely eliminate wet film processing needs, but also to enhance orthopaedic studies of paediatric and adult spines, scoliosis and long bone hip-to-ankle.