Engineers at the University of Connecticut (UConn) have created a biodegradable pressure sensor that could help doctors monitor chronic lung disease, swelling of the brain, and other medical conditions before dissolving harmlessly in a patient’s body. The UConn research is featured in the current online issue of the Proceedings of the National Academy of Sciences. The small, flexible sensor is…
The tech world descended upon Las Vegas this week for the annual Consumer Electronics Show, and plenty of health IT’s biggest players were in attendance. While much of the discussion was on consumer-friendly health tools and novel digital interventions, there were still a handful of products and discussions between executives and entrepreneurs focused on healthcare’s largest roadblocks —…
GE Healthcare has entered into a strategic, long-term partnership with Roche to jointly develop and co-market digital clinical decision support solutions. The partnership will initially focus on products that accelerate and improve individualized treatment options for cancer and critical care patients. The two companies aim to develop an industry-first digital platform, using advanced analytics…
The most common type of tumor found in the kidney is generally quite small (less than 1.5 in). These tumors are usually found by accident when CAT scans are performed for other reasons and the serendipitous finding poses a problem for doctors. Are these tumors malignant and do they need to be surgically removed because they may threaten the patient’s life? Or are they benign and can be left…
Cancer surgeons perform an estimated 1.7 breast biopsies each year, according to the American Association of Preferred Provider Organizations. This makes the procedure a significant proportion of cases referred to anatomic pathologists. This surgery, however, is time-consuming and not always accurate due to shortcomings in existing surgical technology and to human error. Now, a 3D-printed…
Lawrence Livermore National Laboratory scientists and engineers have developed a “brain-on-a-chip” device aimed at testing and predicting the effects of biological and chemical agents, disease, or pharmaceutical drugs on the brain over time without the need for human or animal subjects. The device, part of the Lab’s iCHIP (in-vitro Chip-Based Human Investigational Platform) project,…
No visit to the doctor’s office is complete without a blood-pressure cuff squeezing your arm and a cold stethoscope placed on your chest. But what if your vital signs could be gathered, without contact, as you sit in the waiting room or the comfort of your own home? Cornell University engineers have demonstrated a method for gathering blood pressure, heart rate and breath rate using a cheap and…
3-D visualisation, augmented reality, automated tumour classification – today, the Republic of China produces cutting-edge medical technology and it’s a long time since ‘Made in Taiwan’ stood for inferior, copied products. Over recent years, this island state has successfully morphed into a productive and, above all, innovative manufacturer of medical technology available on the world…
In Rennes, France, more than 850 patients have already been treated with a top accelerator equipped with a multileaf collimator, the first of its kind in the country. Brittany’s capital Rennes is leading stereotactic radiotherapy practice as Eugène Marquis Cancer Centre gears up to welcome worldwide technicians to train on the latest CyberKnife system, Accuray’s powerful robotic radiosurgery…
Luke Skywalker’s bionic hand is a step closer to reality for amputees in this galaxy. Researchers at the Georgia Institute of Technology have created an ultrasonic sensor that allows amputees to control each of their prosthetic fingers individually. It provides fine motor hand gestures that aren’t possible with current commercially available devices. The first amputee to use it, a musician…
The Assistance Publique Hôpitaux de Paris (AP-HP) has organized, in partnership with TeraRecon, Vizua, Microsoft and Digital Evolutis, the live broadcast of the first surgery performed in the world with a collaborative platform of mixed reality at the Avicenne Hospital AP-HP, and interacting with remote doctors. Dr. Gregory Thomas, Head of Orthopedic Surgery and Traumatology Hospital Avicenne…
Researchers using CT scans and 3-D printing have created accurate, custom-designed prosthetic replacements for damaged parts of the middle ear, according to a study being presented at the annual meeting of the Radiological Society of North America (RSNA). The technique has the potential to improve a surgical procedure that often fails because of incorrectly sized prosthetic implants, researchers…
Scientists are using Artificial Intelligence (AI) to support more effective breast cancer detection. The researchers at Massachusetts Institute of Technology (MIT) Computer Science and Artificial Intelligence Laboratory (CSAIL), Massachusetts General Hospital (MGH), and Harvard Medical School, are using the machine learning system to predict whether breast lesions identified from a biopsy will…
How can newborn babies benefit from sensors with chip technology and what might the future hold for sensor data? Samuel Wehrli, Product Manager for Gas Flow at Sensirion AG in Switzerland explained during our EH interview at the MST Conference held in Dortmund.
Bright and new come the revolutionary portable ultrasound scanners EXAPAD and EXAPAD mini which French manufacturer ECM Echo Control Medical reports were developed in close collaboration with key opinion leaders in various medical fields. ‘Optimal image quality for a perfect visualisation, an intuitive and streamlined user interface for a fluid workflow and the unique and useful features…
FUJIFILM SonoSite was pleased to support a Spanish medical team on a humanitarian mission offering critical medical assistance in Kenya, supplying a point-of-care ultrasound system for them to take on their trip. Angela Cepero, team member and radiologist, described the recent trip: “This summer, a group of healthcare professionals – the majority from the Hospital Clínico Universitario…
A preliminary human study was conducted to validate an advanced wearable sensor which has been developed by the start-up company BioBeat Technologies Ltd, comparing it to the common manometry method. The 2015 guidelines of the European Society of Hypertension on The requirements of the International Protocol (revision 2010) were used to define the difference between the commonly used device and…
When Taiwan-based Adlink acquired Penta, the buyer benefited from 20 year’s experience in design and hardware manufacturing. Today, Adlink provides state-of-the-art computing products such as advanced TCA processor blades and platforms, compact PCI/PlusIO, VPX blades, industrial SBCs, motherboards and chassis, plus embedded flash storage, computer-on-modules, rugged small form factor SBCs &…
German firm Plum Medical Solutions is launching its 2nd generation MED-TAB, reported to be the world’s first portable medical imaging workstation. ‘It’s the only standards compliant portable device available for use in radiology and medical image analysis,’ the manufacturer explains.
After this year's successful 1st congress about Emerging Technologies in Medicine (ETIM) in Essen, the organizing committee sets the stage for the second edition in February 16/17, 2018. This year, the event is dedicated to the role of artificial intelligence and robotics in medicine.
Computer Tomography (CT) is a standard procedure in hospitals, but so far, the technology has not been suitable for imaging extremely small objects. In PNAS, a team from the Technical University of Munich (TUM) describes a Nano-CT device that creates three-dimensional x-ray images at resolutions up to 100 nanometers. The first test application: Together with colleagues from the University of…
Hologic, Inc. announced that it will provide all mammography systems for the Dutch Breast Cancer Screening Program in partnership with Tromp Medical, Hologic’s distributor in the Netherlands. Under the tender, Hologic’s new, state-of-the-art 3Dimensions mammography systems will be installed in mobile and stationary screening facilities across the country, starting in 2018. The multi-year…
21st century challenges are multitudinous for all. Ageing populations, a changing disease burden; increasing obesity with associated morbidities – Type 2 diabetes, cancer and cardiovascular disease; climate change pressures and more. Any new build plan demands a low carbon footprint; respect for the environment is paramount. To capture all those elements, the plan to regenerate a previously 10…
A recent Medical Imaging Equipment Age Profile report from AXREM provides worrying reading. The report highlights the continuing increase in the age of the installed base of medical imaging equipment across the United Kingdom.
As the demand for imaging studies booms and digital pathology takes off, it is becoming necessary to look at the interactions between radiology and pathology in telemedicine, an expert explained during the Radiology Triangle Madrid meeting early this year.