The topic of artificial intelligence (AI) was omnipresent at RSNA2018, the annual meeting of the Radiological Society of North America. From the opening presidential address, throughout scientific sessions and educational presentations, to the vendors’ technical exhibition, around 53,000 attendees learned about pioneering new products, research, plus challenges and opportunities to implement…
Today the impressive development of drones by some people is happily regarded as the pinnacle of digitalisation in healthcare. Some groups are testing whether drones can quickly and safely deliver defibrillators to patients in need or whether they can transport laboratory samples or blood products. These developments catch lots of attention, but PD Dr Dominik Pförringer, trauma and orthopaedic…
Researchers at the University of Strathclyde have developed an innovative, low cost test for earlier diagnosis of sepsis which could save thousands of lives. The simple system for sensitive real-time measurement of the life threatening condition is much quicker than existing hospital tests, which can take up to 72 hours to process. Using a microelectrode, a biosensor device is used to detect if…
Anesthesiologists at UT Southwestern Medical Center are helping to explore the use of hypnosis through virtual reality to lessen postoperative pain and anxiety in children.
Nuance Communications, Inc., at its Customer Experience Summit, revealed Project Pathfinder, a breakthrough technology that uses machine learning and Nuance AI innovation to increase the conversational intelligence of virtual assistants (VAs) and chatbots. Project Pathfinder reads existing chat logs and transcripts of conversations between agents and customers within contact centers, and…
Smart knee implants may soon be a reality thanks to research conducted by a team including faculty at Binghamton University, State University of New York. Knee replacement surgery is the most common joint replacement procedure, with the number of surgeries increasing every year. Many of those surgeries are done to replace an older implant or one that has worn out. Increasingly, this surgery is…
A wearable brain-based device called NGoggle that incorporates virtual reality (VR) could help improve glaucoma diagnosis and prevent vision loss. Duke University researchers funded by the National Eye Institute (NEI) have launched a clinical study testing the device in hopes that it could decrease the burden of glaucoma, a major cause of blindness in the U.S. The device consists of head-mounted…
Carestream Health will showcase its latest version of Vue Clinical Collaboration Platform at the HIMSS 2019 tradeshow (Booth #2741) being held February 11-15 in Orlando, Fla. The latest release of its Clinical Collaboration Platform includes a zero-footprint offering with additional modules, as well as report analytics using natural language processing (NLP) to enable data-mining of diagnostic…
Pete Valenti, Hologic’s division president of breast and skeletal health solutions, talks about how AI is driving innovation in breast health technology. Underpinning that evolution more recently has been the acquisition of two organisations – digital specimen radiography specialists Faxitron Bioptics and BioZorb marker manufacturer Focal Therapeutics.
Researchers have developed a prototype medical device based on silicon photonics for the screening of arterial stiffness and for the diagnosis of cardiovascular diseases such as arterial stenosis and heart failure. This is a cooperation between imec, the world-leading research and innovation hub in nanoelectronics and digital technology and Ghent University, together with Medtronic and other…
Efforts have been made to digitise pathology in the Netherlands, where the Dutch pathology network PALGA has run since 1990, connecting all of the Netherlands’ laboratories. Paul J van Diest, head of the pathology department at the Utrecht University Medical Centre, presented the brand new Dutch digital pathology platform during ECP 2018. Launched this year, this enables quicker, easier…
You’re sweating and feverish and have no idea why. Fortunately, Sandia National Laboratories scientists have built a device that can pinpoint what’s wrong in less than an hour. Unlike most medical diagnostic devices which can perform only one type of test — either protein or nucleic acid tests — Sandia’s SpinDx can now perform both. This allows it to identify nearly any cause of…
A new device developed by Stanford University researchers could make it easier for doctors to monitor the success of blood vessel surgery. The sensor, detailed in a paper published in Nature Biomedical Engineering, monitors the flow of blood through an artery. It is biodegradable, battery-free and wireless, so it is compact and doesn’t need to be removed and it can warn a patient’s doctor if…
Jhy-Wey Shieh sees the link between Taiwan and Germany as obvious: ‘The word “trade” – of central importance for Medica – starts with “t” for Taiwan and contains “de” for Germany – there is no better way to put it.’ Even though the Taiwanese ambassador’s linguistic journey was not to be taken too seriously, this year’s presentation from the Taiwan External Trade…
A new neurostimulator developed by engineers at the University of California, Berkeley, can listen to and stimulate electric current in the brain at the same time, potentially delivering fine-tuned treatments to patients with diseases like epilepsy and Parkinson's. The device, named the WAND, works like a "pacemaker for the brain," monitoring the brain's electrical activity and…
Sharing experience, following trends, seeing innovative practices and technologies, and networking are key drivers for the development of medicine. Essential for medicine and dentistry in Southeastern Europe, the Bulmedica/Buldental international exhibition will bring together specialists and leading companies in the capital of Bulgaria – Sofia – from 15 to 17 May 2019. "The professional…
The Czech Republic has a long tradition of ground-breaking medical innovations. At Medica 2018, the presence of Czech companies and traders underlined that medical devices and technologies from this country have continuing strength and value. Having recorded steady growth over the past few years, the Czech medical technology sector now produces a volume of around €870 million. 13,400 people…
Researchers funded by the National Institute of Biomedical Imaging and Bioengineering (NIBIB) are literally breaking barriers using ultrasound waves emitted from a flexible patch to accurately measure central blood pressure and help detect cardiovascular problems earlier. For a while now, smart, wearable devices have had the ability to capture how many steps we take in a day or measure our heart…
From May 15 to 17, 2019, the international exhibition Bulmedica/Buldental will bring together in Bulgaria’s capital city - Sofia experts and leading companies from the sphere of medicine and dentistry. Being held at Inter Expo Center, Bulmedica provides a meeting place for manufacturers, importers, agents, distributors and dealers of medical equipment, furniture, devices, tools and consumables.…
Professor Marc Dewey, Vice Chair of the Department of Radiology at Charité - Universitätsmedizin Berlin, made value-based radiology the main theme of the Wilhelm Conrad Röntgen Honorary Lecture during ECR 2018. Radiology practice needs change, he said, and radiologists should grasp at new technology to drive their future. His lecture was summarised in a recent comment in The Lancet.
As 3D printing technology continues to evolve, read how radiology will be involved in managing digital workflow related to patient care. “3D printing is a part of medicine, and radiology is at the center of this impactful new technology,” said RSNA 3D Printing Special Interest Group (SIG) Chair Jane Matsumoto, MD, assistant professor of radiology and co-director of the 3D Printing Lab at the…
On April 29th 2011, a car accident injured Tian-Zong’s spine and since then he has not been able to feel his legs and couldn’t to stand or walk again. His visual field has shrunk from 180 cm standing height to 110 cm when sitting on his wheelchair. At the time when the accident happened, he was only 36 years old and the scheduled wedding was forced to be cancelled. Sitting on a wheelchair,…
A world where machines can be controlled by thought alone – such is the promise of so-called brain-computer interfaces (BCI). BCIs are both hardware and software communication systems that read brain and nerve signals, convert those into electrical signals and translate human thoughts into machine commands. Developers of BCIs rely on artificial intelligence, neural network models and big data…
Over in the United Kingdom Pavilion (Hall 16) you can expect quality among the latest medical devices, diagnostic software and digitally-enabled technologies produced by nearly 100 pioneering British health technology companies. ‘With over 97,000 people working in the UK’s HealthTech sector, it’s the life sciences’ biggest employer, and its importance has rightfully been recognised by the…
Taiwan’s long-term investment in research and development has transformed the country from the low-cost production center of yesterday into the go-to source for original technologies for the global community of healthcare professionals and medical device manufacturers. Still, Taiwan develops and manufactures high-quality medical devices at costs that are far lower than those in Europe and the…