Better than staples and pins: Researchers have developed a hot-glue gun to...
Better than staples and pins: Researchers have developed a hot-glue gun to adhere human tissues that have been seriously injured.

Source: Technion–Israel Institute of Technology

News • Advanced healing

Hot-glue gun fuses biocompatible tissue

Hot-glue guns can be used for more than putting together cardboard furniture, home decorations, and toys. In fact, researchers at the Technion–Israel Institute of Technology have developed a hot-glue gun to adhere human tissues that have been seriously injured.

Most serious injuries are currently treated with pins and stitches that have many drawbacks. For the patient, they are very painful, leave scars, require high skill from the doctor, and sometimes have to be removed after the tissues heal. Medical glue, on the other hand, can produce improved medical and cosmetic results.

Such tissue bioadhesives are widely used in dermatology, surgical theaters, and in the field. But even though they have advantages over sutures and staples, currently available tissue glues are limited by their mechanical properties and toxicity. Because they are very toxic, they can be utilized only on the surface of the skin. In addition, hardening of the glue may make the organ less flexible or the adhesion may not be sufficiently strong.

With these limitations in mind, researchers have long been trying to develop a glue that is suitable for different tissues, non-toxic, and flexible after hardening. Such a glue would also need to decompose in the body after the tissue is fused together.

Prof. Boaz Mizrahi and doctoral student Alona Shagan introduce a very strong, non-toxic tissue adhesive that remains flexible even after solidification. Melting the glue and smearing it on the damaged tissue is performed with a hot-glue gun. Unlike the glue guns with which we are familiar, this gun warms the glue to a moderate temperature – just above that of the body – so as not to cause a burn. After the glue is applied, it quickly hardens and decomposes within a few weeks. The adhesive is also suitable for the adhesion of tissue inside the body, and it is four times as strong as existing adhesives used for this purpose. Tested on cells and laboratory animals, it was effective and nontoxic.

The new approach is based on a biocompatible, low-melting-point, four‐armed N‐hydroxy succinimide‐modified polycaprolactone (star‐PCL‐NHS). Star‐PCL‐NHS is inserted into a hot-melt glue gun and melts upon minimal pressure, the team wrote. It is squeezed directly onto the wound, where it solidifies, bonding strongly with both edges of the wound. Changes in molecular weight allow control of adhesive strength, melting point, and elasticity properties. In-vitro and in-vivo evaluations confirm the biocompatibility of this system. The straightforward synthetic scheme and the simple delivery method – combined with the desirable mechanical properties, tenability and tissue compatibility – are desirable traits in wound management.

The researchers believe the new concept will lead to the development of devices that will reduce the use of stitches, staples and pins, speed up the healing process and reduce scarring.

Source: Technion–Israel Institute of Technology

19.06.2019

Related articles

Photo

News • Monitoring

'Smart bandage' detects bed sores

Engineers at the University of California, Berkeley, are developing a new type of bandage. Thanks to advances in flexible electronics, the researchers have created a new "smart bandage"…

Photo

Article •

Intensity-modulated radiotherapy

IMRT is an evolving method of treatment for complex forms of cancer. Although patients benefit from treatment, a precise evaluation of that benefit and overall cost-effectiveness of the method is…

Photo

Article • Patient safety & products

What's a dynamic mattress?

Dynamic mattresses, also called alternating air pressure mattresses or replacement mattress systems, have air cells that alternately inflate and deflate in a cycle to relieve pressure on the body.

Related products

Subscribe to Newsletter