The computational lung model provides a better understanding of the...
The computational lung model provides a better understanding of the complexities of lung function and processes – even down to the microscopic level.

Source: Jakob Richter / TUM

COVID-19 and ARDS

Computer model of the lung enables protective ventilation

The use of mechanical ventilation can save lives – and not just for COVID-19 patients who develop severe respiratory problems. But at the same time, the ventilation pressure puts immense stress on delicate lung tissue. Especially for patients with preexisting lung damage, the use of ventilators can prove deadly. A computational lung model that’s been developed by the Technical University of Munich (TUM) can be used to reduce damage caused by mechanical ventilation – and could increase survival rates for patients significantly.

For patients suffering from acute lung failure (Acute Respiratory Distress Syndrome, ARDS), mechanical ventilation is a lifesaving treatment. But the situation is paradoxical: at the same time that medical teams employ ventilation to keep a patient’s lungs open to ensure the continuous exchange of oxygen and CO2, the ventilation pressure can cause such severe damage to the lungs that it results in the patient’s death.

Doctors treating patients for acute respiratory problems have a limited range of parameters to work with when determining the best protocol for mechanical ventilation – pressure limits, oxygen level and air flow, for example.

But the lung is a complex organ, and the amount of pressure necessary to keep all parts of the lung open to airflow can actually cause damage to some parts through overdistention of the tissue. Additionally, doctors need to minimize repeated recruitment and derecruitment of parts of the lungs during mechanical ventilation, since both can irritate the lung tissue and trigger inflammation.

Making the invisible visible

According to researcher Wolfgang Wall, Professor for Computational Mechanics at TUM, “The real crux of the problem is that when we’re treating a patient using mechanical ventilation, up until now, there hasn’t been any way to detect overdistention of the lung tissue. From the main bronchial tubes through to the tiniest structures in the lungs, there are more than 20 levels of branching. Currently, there’s no method for measuring what’s happening in the smallest, microlevel branches of the lung during artificial respiration.”

Although some medical texts still – inaccurately – portray the lung’s air sacs (alveoli) as similar to grapevines and bunches of grapes, lung tissue actually has a more sponge-like consistency. And it’s through this fine-walled tissue where the exchange between the air and the bloodstream occurs. Breathing comprises an extremely complex mechanical interaction between the different types of tissue, the liquid film on the tissue and the flow of air.

For several years, TUM researchers have been working to develop ever-more sophisticated models to simulate the behavior of lung tissue and airflow. Together with improved methods of micromechanical testing on lung tissue samples, their research has resulted in the creation of a computational lung model.

This model is the basis of a computer program which can calculate the local strains which would be placed on the lung’s microlevel tissues by different ventilator settings. Having these data at hand, medical staff and doctors can adjust the ventilator settings accordingly to provide a protective ventilation.

Utilizing the data of a CT lung scan, the software uses artificial intelligence...
Utilizing the data of a CT lung scan, the software uses artificial intelligence to calculate the actual condition of a patient’s lungs. Damage caused by a COVID-19 infection is marked in orange.

Jakob Richter / TUM

Using AI to interpret the data

The current clinical standards guiding treatment with mechanical ventilation use a patient’s body weight to determine optimal ventilator pressure settings. However, the program developed by Prof. Wall and his team models the actual lung based on data compiled from a CT lung scan. It even considers the condition of individual areas of the lung that have already been damaged by the disease or previous injuries.

By measuring the changes in pressure and volume that occur during an inhalation and exhalation cycle, the digital lung model calculates the individual mechanical characteristics of the patient’s lungs. The result: a digital “twin” model of the patient’s lungs. It is so precise, that it can accurately predict which ventilator settings will cause damage to the patient’s lungs.

Parallel to continuing his working group’s research together with clinical partners, Prof. Wall and three former colleagues founded the company “Ebenbuild” to bring their research into clinical practice as quickly as possible.

A key step in realizing this goal was automating the generation of lung models using artificial intelligence (AI). Prof. Wall and his team have harnessed the computing power of AI to developed a digital tool that can “map” a patient’s lungs – and which can even be used for early detection of COVID-19 infections.

“More than 80 percent of COVID-19 deaths are the result of acute lung failure,” says Prof. Wall. “And with long-term mechanical ventilation, the survival rate for our most critically ill patients drops to only 50 percent,” he adds. “The goal of our work is that in the future, at each ventilation site a digital lung model helps to optimize the ventilation to the patient’s needs so that we can significantly increase the chance of survival.”

Quelle: Technical University of Munich

24.04.2020

Read all latest stories

Related articles

Photo

Improved accuracy and efficiency

AI could improve CT screening for COVID-19

Researchers at the University of Notre Dame are developing a new technique using artificial intelligence (AI) that would improve CT screening to more quickly identify patients with the coronavirus.…

Photo

Imaging collaboration

AI quantifies COVID-19 in chest CT images

Hospitals and organizations worldwide joined forces with AI imaging company icometrix in a global initiative to leverage artificial intelligence (AI) in the fight against COVID-19. The multinational…

Photo

Visualising the breathing lung

After previous meetings in the USA (2002) and Japan (2004), this October the 3rd International Workshop of Pulmonary Functional Imaging (IWPFI) took place in the German Cancer Research Centre, based…

Related products

Radcal – Accu-GoldTouch

Testing Devices

Radcal – Accu-GoldTouch

Radcal Corporation
AB-CT – Advanced Breast-CT – nu:view

Mammo CT

AB-CT – Advanced Breast-CT – nu:view

AB-CT – Advanced Breast-CT GmbH
AB-CT – Advanced Breast-CT – nu:view

Mammo CT

AB-CT – Advanced Breast-CT – nu:view

AB-CT – Advanced Breast-CT GmbH
Agfa HealthCare – Dose

Dose Management Systems

Agfa HealthCare – Dose

Agfa HealthCare
Agfa HealthCare – DR 14e detector

DR Retrofit

Agfa HealthCare – DR 14e detector

Agfa HealthCare
Agfa HealthCare – DR 17e detector

DR Retrofit

Agfa HealthCare – DR 17e detector

Agfa HealthCare