interior of MRI scanner, with new motion artifact sensor circled in yellow
This self-powered sensor (circled in yellow) attached to a headrest within an MRI machine could help make imaging collection more efficient by detecting patient movement in real time.

Image source: ACS; adapted from: Hu Y et al., ACS Sensors 2024

News • Motion artifact monitoring

Movement-detecting sensor could make MRI scans more efficient

MRI scans are commonly used to diagnose a variety of conditions, anything from liver disease to brain tumors. But, as anyone who has been through one knows, patients must remain completely still to avoid blurring the images and requiring a new scan.

A prototype device described in ACS Sensors could change that. The self-powered sensor detects movement and shuts down an MRI scan in real time, improving the process for patients and technicians. 

During an MRI scan, a patient must stay entirely still for several minutes at a time, otherwise “motion artifacts” could appear and blur the final image. To ensure a clear picture, patient movement needs to be identified as soon as it happens, allowing the scan to stop and for the technician to take a new one. Motion tracking could be achieved using sensors embedded into the MRI table; however, magnetic materials can’t be used because metals interfere with the MRI technology itself. One technology that’s well-suited for this unique situation, and avoids the need for metal or magnetic components, is the triboelectric nanogenerator (TENG), which powers itself using static electricity generated by friction between polymers. So, Li Tao, Zhiyi Wu and colleagues wanted to design a TENG-based sensor that could be incorporated into an MRI machine to help prevent motion artifacts.

Recommended article

The team created the TENG by sandwiching two layers of plastic film painted with graphite-based conductive ink around a central layer of silicone. These materials were specifically chosen as they would not interfere with an MRI scan. When pressed together, electrostatic charges from the plastic film moved to the conductive ink, creating a current that could then flow out through a wire. 

This sensor was incorporated into an MRI table designed to lay under a patient’s head. In tests, when a person turned their head from side to side or raised it off the table, the sensor detected these movements and transmitted a signal to a computer. Then, an audible alert played, a pop-up window on the technician’s computer appeared and the MRI scan ceased. The researchers say that this work could help make MRI scans more efficient and less frustrating for patients and technicians alike by producing better images during a single procedure. 


Source: American Chemical Society

07.06.2024

Related articles

Photo

News • Quantum sensing prototype

A sensor that detects errors in MRI scans

A new sensor prototype can detect errors in MRI scans in a way that is impossible for current electrical sensors – and hopefully pave the way for MRI scans that are better, cheaper and faster.

Photo

News • Magnetic resonance elastography

Faster than fMRI: Seeing brain activity in ‘almost real time’

The speed of the human brain is remarkable. Almost immediately upon being exposed to stimuli, neurons are activated, prompting subconscious reactions and, a fraction of a second later, thought. But…

Photo

News • Patient comfort

New MRI coils decrease scan time

New, screen-printed, flexible MRI coils may be able to reduce the amount of time it takes to get an MRI scan. Researchers funded by the National Institute of Biomedical Imaging and Bioengineering…

Related products

Subscribe to Newsletter